User manual NUMARK TT200

[. . . ] Water and Moisture This product should be kept away from direct contact with liquids. Heat - Avoid placing this product to close to any high heat sources such as radiators. Ventilation - The appliance should be situated so that it's location or position does not interfere with it's proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening; or, placed in a builtinstallation, such as bookcase or cabinet that may impede the flow of air through the ventilation openings. [. . . ] Talkover is very useful for making announcements without adjusting any levels. 9. 10. 11. 5. 14. 15. 8. HEADPHONE CUEING Channel Cue Assign - are used to route Pre Fader Level (PFL) channel audio to the Monitor Section. The channel faders do not control the Cue volume. Split/Blend Cue ­ controls how PFL and Program audio are sent to your headphones. In split mode, the PFL audio can be heard in your left ear and PGM audio can be heard in your right ear. In blend mode, both PFL and PGM can be heard in both ears. Headphone Mix - controls the mix of PFL and PGM signals to your headphones. When the slider is moved to the left, all you will hear is the cue source. When the slider is all the way to the right, you will hear what is playing through the master output. By blending, beats can be matched exactly and segues can be smooth when a song is cued. Headphone Level ­ adjusts cue volume. In this example "Hard left" selects Channel 1 and "Hard right" selects Channel 4. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other. Note: The crossfader is replaceable in case of failure. Simply remove all knobs from the facepanel and unscrew the 5 screws that hold it in place. Then remove the 2 fader screws that hold the crossfader to the subchassis, lift it out and disconnect its cable. Re-attach the new crossfader and replace the faceplate and knobs back onto the unit - you're back in business!Crossfader Slope ­ determines how quickly the audio from the opposing side of the crossfader activates. A tight curve (hard right) turns on the opposing audio signal with very little crossfader movement. A loose curve (hard left) makes very long and smooth segues in transition. Crossfader Assign Knob - determines which input channel will be heard when the crossfader is moved towards the knob and which channel is fader start. [. . . ] Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. Upon receipt, NUMARK will repair or replace the defective products. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. [. . . ]