User manual OASE FILTOMATIC CWS

[. . . ] Congratulations on your purchase of the FiltoMatic CWS. Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit. Ensure that all work with this unit is only carried out in accordance with these instructions. Adhere to the safety information for the correct and safe use of the unit. [. . . ] Setting the dirty water pump As the water temperature, the degree of soiling of the pond water greatly depends on the fish population. The dirty water pump pumps out the dirt from the container bottom in intervals. The four different cleaning programs allow to individually adapt the interval for pumping off the dirty water to the degree of soiling. Water temperature Cleaning programs, dirty water pump - Intervals + Intervals INTERVAL 1 INTERVAL 2 INTERVAL 3 INTERVAL 4 off off off off 1 × per day every 2 days every 3 days every 3 days 2 × per day 1 × per day every 2 days every 3 days 4 × per day 2 × per day 1 × per day every 2 days 8 × per day 4 × per day 2 × per day 1 × per day OF off off off off off The pump can then only be actuated manually. For fully pumping out, keep the PUMP (C4) key permanently pressed. Release the INTERVAL (C5) key when the desired cleaning program is displayed. - The setting is saved when the water temperature appears in the display (C1) after a period of approx. Manual pumping out of the dirty water The dirty water can also be removed by pumping manually. Complete container emptying starts when you keep the PUMP (C4) key pressed for longer than 10 seconds. The dirty water pump runs for a maximum of 4 minutes. You can stop the drainage cycle by pressing the PUMP (C4) key once. With its UV light, the UVC clarifying unit operating under water removes green algae, as such forming a significant component for pond water cleaning. Depending on the water temperature, the UVC lamp of the UVC clarifying unit is switched on and off in intervals with the AU operating program. In this manner it can be individually adapted to the degree of soiling. The following table shows the operating program AU (Automatic) of the UVC clarifying unit as well as the operating statuses ON and OFF. Water temperature AU < 8 °C 8 °C - 14 °C 15 °C - 21 °C 22 °C UVC lamp is switched on 8h 48 h 72 h 96 h UVC clarifying unit operating programs ON UVC lamp is UVC lamp is switched permanently switched off on 16 h 24 h 24 h 24 h OFF UVC lamp is permanently switched off With Power ON, the operating program AU starts with the OFF interval. The use of Biokick CWS during start-up protects the bacteria cultures in the Biokick CWS. The UVC clarifying unit starts with the ON interval when the AU operating program is manually selected. Release the UVC (C6) key when the desired operating program is displayed. This is how to remove the cleaning components (Figure K) 1. Open lid (1) with the rotary handle (2) and remove lid from the container (3) (Figure H). - Pond water no longer flows into the container. [. . . ] Press the PUMP (C4) key for longer than 10 seconds. - You can stop the drainage cycle by pressing the PUMP (C4) key once. Once the container if fully drained, when the dirty water pump switches off no water flows through the transparent outlet sheath (6). - GB Cleaning the unit For this purpose, remove the lamella separator (51) and the dirt pyramide (52). [. . . ]