User manual ODYSSEY LDK DIGITAL PHONE

[. . . ] Do not use the telephone to report a gas leak in the vicinity of the leak. Unplug this telephone from the wall outlets before cleaning. Serious damage and/or injury may result if the telephone falls. Do not cover the slots and openings on this telephone. [. . . ] Connect one end of the telephone line cord to the "Line" jack on the back of the LDK DIGITAL PHONE and the other end to the phone outlet on your wall. Insert the tabs of the phone base into the slots in the lower position of the base as shown in Figure 7. Push the mounting bracket in and down firmly until it snaps into place. Plug the AC adapter into an electric outlet and into the AC jack on the telephone as shown in Figure 5. Angle the phone downward to feel for the LOWER protruding nail head. Once the lower nail head has been inserted, insert the UPPER nail head into the phone's bracket and slide the phone down until it is firmly in place on the wall. Once firmly in place, attach the short line cord to the phone, the AC adapter to the phone and attach the phone's handset. Plug the AC adapter into the AC wall outlet. lift the handset and listen for a dial tone. Locate a desired wall phone jack near an AC outlet and hold phone upright. Plug the short phone line cord into the wall outlet as shown in Figure 8. Note: this feature does not require any optional telephone company services. It is useful when you are away for a short time while expecting a call. If you don't want any notification, set the switch on OFF. Note: To turn the Voice Mail feature on or off, adjust the switch underneath the phone. Figure 18 - Voice Mail Switch If you do not have voice mail service, the same indicator functions as a missed call indicator. Enter the phone number on the keypad (Figure 21) just as you would dial it normally. Note: Press REDIAL if you want to insert a brief pause between two numbers. Programming the Memory Buttons You can automatically dial twelve programmed telephone numbers using the memory buttons shown in Figure 19. Each button can be programmed (or reprogrammed using the same procedure) for a phone number up to 15 digits long. Press a memory button (Figure 19) to store this number on that button. Note: Any number previously stored at that memory button will be overwritten. [. . . ] Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. The Ringer Equivalence Number is an indication of the maximum number of terminals allowed to be connected to a telephone interface. [. . . ]