User manual OKI B6250N SETUP GUIDE

[. . . ] The specifications that apply to your printer depend on your configuration. To prevent fire or shock hazards, connect the power plug only to a properly rated power outlet. handling the printer · The printer is very heavy and should always be lifted by two people. The main parts of the printer and a brief description of their functions are shown below: 9 Duplex unit connector For connecting the duplex unit (option). [. . . ] Connect the power cord to the power cord connector at the back of the printer. Connect the other end of the power cord to the power outlet. If the base plate of the paper tray is raised, push it down. The power will be applied and the control panel will display that the printer is ready to print. > Depending on the network environment used, it may take some minutes before the printer is ready for printing. Load the paper with the side to be printed facing up and with all four corners aligned. The control panel components and their functions are described below: Do not place paper over the right width guide. Do not load paper exceeding the maximum fill line or the maximum capacity allowed. Align the right width guide with the paper width correctly. If the right width guide is not in place, the paper will not be properly fed and this may cause paper jams. Close the lid of the paper tray and push the tray completely into the printer. The menu map (2pages) will print with all the current printer settings. 3 <READY> indicator When the light is on, the printer is ready to receive data from the computer. 4 LCD display Displays the setting items , machine status , and messages. 5 <ATTENTION> indicator When the light is on, there is a malfunction in the printer. 6 <On-Line> button Press to enter the off-line status. When in the off-line status, the machine cannot receive data or process printing. Press again to exit the offline status and enter the on-line status (where the machine can receive data from the computer). 9 < > < > < > < > buttons Press these to move to the required menu, item and candidate value on the display. If not, the paper may become misaligned. Depending on the types and sizes of the loaded paper, you need to configure settings on the control panel. Change the paper type when non-plain paper such as recycled paper, heavyweight paper or transparencies is loaded. [. . . ] press the TEST button (3) on the print server to print the Network Information configuration sheets. Keep these sheets handy: they contain information you need to set up the printer on your network. Turn on the printer, then turn on the computer. Select any utilities you want to install. [. . . ]