User manual OKI B8300N REFERENCE GUIDE

[. . . ] Contents Ordering Replacement Supplies . 11 Setting Paper Size and Type from the Operation Panel . 14 Loading Print Media: Multipurpose Drawer . 15 Loading Print Media: Transparency Film . [. . . ] 10. Operation is now complete. 11. To continue operation, repeat steps 1 to 9. 27 Condition Settings There are three options that can be set from the Operator Panel for this setting: · Default settings: Basic settings used in printing. · PCL Symbol Set: Establishes a PCL symbol set. · Print PS Errors: Defines whether a PostScript error page is printed or not when a PostScript error has occurred. Press MENU until SET OPERATIONS CONDITIONS appears. Press OK. BACK/C OK How to Access Condition Settings · Items that can be set from the operator panel: printer and any job currently transmitted to the printer will be printed with the former printer settings. 3. Press or until the desired setting appears. MENU BACK/C 5. Press or until the desired setting appears. When setting is complete, press MENU until you have returned to the READY screen. · "*" displays to the right of the selected item indicating the setting has been registered. 4. Press OK. 28 Default Settings The default settings allow detailed print conditions to be set for printing without any printer driver (for example, printing from MS-DOS and printing from a computer without any printer driver installed). While some items can be set either in the printer driver or on the operator panel, values set in the printer driver override those set on the panel. Use the printer driver to set options where possible. These are the options that can be set from the Operator Panel for this setting: Smoothing: SMOOTHING reduces jagged edges (jaggies). Default Setting: ON Copies: the number of copies to be printed. Default Setting: 1 Orientation: allows portrait or landscape orientation to be selected for printing. Default Setting: Portrait Default paper size: The paper size to be used for normal printing. Default Setting: 8 1/2 x 11 or A4 Default paper type: The paper type to be used for normal printing. Default Setting: PLAIN Default output tray: The output tray to be used for normal printing. Default Setting: Depends on installation of peripheral devices. Line thickness: Determines the line density to be used for normal printing. Default Setting: 5 29 Default Settings (cont. ) How to Access Default Settings 1. Press MENU until SET OPERATIONS CONDITIONS appears. [. . . ] If the password is not known, printing cannot be executed. Remove paper from the exit tray if it is full. 45 Notice Page Printing Af Notice Page will be printed when the current print job cannot be done due to a system limitation and an explanation of the limitation is too lengthy to be shown in the message display. A Notice Page will describe the limitation and other possibilities to run the job. A Notice Page will be printed in the following cases: · When sufficient memory is not available to store the print data. This may happen even if the amount of data for the job is not large when the memory becomes full with data of other jobs. [. . . ]