User manual OKI C8800N NETWORK REFERENCE GUIDE

[. . . ] Version 1 Definitions of warnings, cautions, and notes We use the following icon throughout this User's Guide: Notes tell you how you should respond to a situation that may arise or give tips about how the operation works with other features. Trademarks Brother and the Brother logo are registered trademarks and BRAdmin Professional is a trademark of Brother Industries, Ltd. UNIX is a registered trademark of The Open Group. Apple, Macintosh, Quick Draw and LaserWriter are registered trademarks of Apple Computer, Inc. HP, Hewlett-Packard, Jetdirect and PCL are registered trademarks of Hewlett-Packard Company. [. . . ] Click the Details tab and then the Add Port button. In the Add Port dialog, select the Other radio button and then highlight Brother LPR port. If you have already used this name, you will get an error message if you try to use it again, in which case use BLP2, etc. . . Once you have specified the port name, click the OK button. You will then see the Port Properties dialog. Enter the IP address of the printer that you wish to print to and click OK. You should now see the port that you have just created in the Print to the following port setting of the printer driver. Other sources of information See Chapter 2 of this User's Guide to learn how to configure the IP address of the printer. 3-7 4 Network printing from Windows®: NetBIOS Peer-to-Peer printing 4 Overview Brother print server range supports SMB (Server Message Block). This means that just like regular Windows® PC's, Brother printers can appear in your network neighborhood. The main advantage of NetBIOS printing is that you are able to print from legacy DOS applications that are running on PC's that are connected to Microsoft networks. Note · You must configure the IP address on your printer before you proceed with this chapter. · The default password for Brother print servers is access. You will also find that the print server may take several minutes to disappear from the network neighborhood even if the printer is switched off. This is a feature of Microsoft® workgroup and domain based networks. Changing the Workgroup/Domain Name using a web browser You can also use a standard WWW browser to change the NetBIOS name. To do this, connect to the print server using its IP address and then select the Configure NetBIOS option from the Network Configuration screen, then enter your workgroup/domain name into the Domain Name text box. Make sure you submit the changes (click the Submit button). Changing the Workgroup/Domain Name using TELNET If you are unable to use the BRAdmin Professional utility, you can use TELNET. When you are connected to the print server, enter the default password access in response to the # prompt. Type in anything in response to the Enter Username> prompt, you will then be at the Local> prompt. Now enter the command: SET NETBIOS DOMAIN domainname EXIT Where domainname is the name of the domain or workgroup that you are on. If you are not sure what your domain name or workgroup name is, look in the Identification tab in your Windows® 95/98/Me and Windows NT®4. 0 network applet. 4-3 Network printing from Windows®: NetBIOS Peer-to-Peer printing Installing the Brother NetBIOS Port Monitor The Brother NetBIOS Port Monitor requires the TCP/IP transport protocols to be installed on your Windows® 95/98/Me/2000/XP and Windows NT®4. 0 computer. To install those protocols, see your Windows® documentation. If you are using the TCP/IP protocol, the proper IP address should be defined on both the Brother print server and your client PC. Note If you already installed the driver from the printers CD-ROM Installer and you selected "Brother Peer-to-Peer Network Printer" during the installation then you do not need to install the Brother Network Print Software again. 4 1 2 3 4 5 6 7 8 9 Start the CD-ROM installation menu program according to the printer Quick Setup Guide. [. . . ] 1-4 Domain . . 2-5, 3-4, 3-6, 4-1, 4-2, 4-3, 5-2, 8-5 DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 F Factory Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Q QuickDraw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1, 6-1 G Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 R RARP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]