User manual OKI MB760F USER GUIDE

[. . . ] Use only a damp cloth; do not use liquid or aerosol cleaners. • Place your product on a firm , solid surface. If you put it on something unsteady, it may fall and be damaged. If you place it on a soft surface, such as a rug, sofa, or cushion, the vents may be blocked, causing the product to overheat. [. . . ] on-Site Repair Note: On-Site Repair is available in the United States and Canada only. On-Site Repair does not include the replacement or repair of Product consumables or supplies. Oki Data will, for a period of one (1) year from the date of original purchase, repair or replace (at Oki Data's option) on-site at the original purchaser's facility and without charge, any defective component(s) of the Product provided that the warranty service is performed by an Oki Data authorized service provider. The printheads (LED imaging arrays) have a 5-year parts only warranty from date of original purchase. Following the first year of warranty coverage, the printheads will be replaced by an authorized Oki Data service provider at Oki Data's then current labor rates. To make request or claim for service under the one (1) year parts and labor coverage of this Limited Warranty, contact your Oki Data Authorized Dealer, authorized third-party service provider, or Oki Data. Oki Data reserves the right to use new and/or refurbished parts for the warranty repair. As a condition of this Limited Warranty, requests for On-Site Repair must include the name and phone number of a fully competent and responsible adult with the authority to consent to the entry of the servicing technician to the premises where the Product is located, and who will remain with the servicing technician while the service work is performed. Any and all dangerous conditions must be removed from the site prior to and throughout the time a service technician is present. The service technician may refrain from entering the premises or continuing to provide services at any site, if in the servicing technician's reasonable judgement the site poses a risk of physical harm or danger. If warranty services cannot be performed or completed due to any of the foregoing reasons the On-Site service option is null and void and the Product must be returned to an authorized Oki Data service location for warranty repair service. This equipment complies with Part 68 of FCC rules and the requirements adopted by the ACTA. On the back of the equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. The following USOC jacks may be used with this equipment: RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. it is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5. To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the local telephone company. [. . . ] Ecological information Ecotoxicity The environmental impact of this product has not been fully investigated. However, this preparation is not expected to present significant adverse environmental effects. chronic toxicity Product Information 11 - English 13. Disposal considerations Waste Disposal Methods This material, as supplied, is not a hazardous waste according to Federal regulations(40 CFR 261). [. . . ]