User manual OKI MC560 MFP PLUS

[. . . ] COPYRIGHT INFORMATION Copyright © 2010 by Oki Data. All Rights Reserved DOCUMENT INFORMATION MC560 Plus User's Guide P/N 59101101 Revision 1. 0 April, 2010 DISCLAIMER Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. [. . . ] Press OK to confirm deletion of fax jobs or press Stop to cancel the operation. FAX JOB REPORTS 1. Press the Menu button on the control panel to prompt the menu settings screen. Using the UP arrow key, navigate to Fax Settings and press OK. Using the UP arrow key, navigate to the Reports and press OK. Select required report and press OK to print: > Activity report Operation > 101 > Transmission report The transmission report can be modified with the following options available: Yes / Error Only / Off. > Broadcast report SCANNING SCANNER OPERATION 1. Select the File menu and choose Select Source. If the Select Source command is not available on the File menu, see your application's user's guide to determine how the TWAIN link is used. A dialog box with a list of scanning sources appears. You need to select the source only once, unless you want to choose another scanner. Place the document face DOWN on the document glass or face UP in the ADF. Select the File menu and choose Acquire. A dialog box containing scanning features appears. 1 2 3 6. Select the scanning method you want to use from the Scan Method (1) drop-down menu. Operation > 102 7. 9. Select the mode you want to use for your scans from the Image Type (2) drop-down menu. Select a scanning resolution from the Resolution (3) drop-down menu. Select the setting for the scanning features (e. g. Sharpen, Descreen, etc. ) that you want to use (see "enhancing your image" later in this Chapter). Click on the Preview or Scan button to preview or scan you documents. 10. Operation > 103 A LOOK AT THE USER INTERFACE 7 8 9 10 11 1 2 3 4 5 6 1. 9. Scan Method Image type Resolution Brightness Contrast Further tools Invert Mirror Function Preview Auto Area Choice: ADF/Multi-page, Flatbed. Choice: Black & White, 8-Bit Gray, 24-Bit Color, Half tone. Choice: 50, 72, 100, 144, 150, 200, 300, 600, 1200, 2400, 4800 (dpi). Adjust the brightness level from -100 to +100. [. . . ] In the driver's Setup tab, click the [Options] button. Choose the scaling factor you need from the PCL Scale2Page_oda. jpg [Conversions] drop-down list. A guide to printing > 230 WATERMARKS A watermark is typically faint text that is superimposed on a printed document. This can used to indicate that the document is "Draft", or perhaps "Confidential". The illustration below shows the Windows PostScript driver. [. . . ]