User manual OKI MPS6500B

[. . . ] MPS6500b User's Guide 59319401 my. okidata. com Copyright Information Copyright © 2009 by Oki Data. All Rights Reserved Document Information ________________________________ MPS6500b User's Guide P/N 59319401, Revision 2. 1 August, 2009 Disclaimer__________________________________________ Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. [. . . ] Press <SELECT> to save the selection. MPS6500b User's Guide> 69 Submenus Default Setting None Available Settings None Even Odd Procedure for Changing Setting Press < > or < > buttons to toggle between None, Even, and Odd. Press <SELECT> to save the selection. Parity DTR Ready/ Busy Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. DTR On1/Off1 Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. DTR Error Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. RTS Ready/ Busy Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. RTS On1/Off1 Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. RTS Error Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. XON Ready/ Busy On Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. MPS6500b User's Guide> 70 Submenus Default Setting On Available Settings Off On Procedure for Changing Setting Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. XON On1/Off1 XON Error Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. DTR Polarity High High Low Press < > or < > buttons to toggle between High and Low. Press <SELECT> to save the selection. RTS Polarity High High Low Press < > or < > buttons to toggle between High and Low. Press <SELECT> to save the selection. Robust XON Off Off On Press < > or < > buttons to toggle between Off and On. Press <SELECT> to save the selection. PS Protocol ASCII ASCII RAW Press < > or < > buttons to toggle between ASCII and RAW. Press <SELECT> to save the selection. MPS6500b User's Guide> 71 USB Menu The USB Menu provides access to the USB settings. Use the following procedure to enter the USB menu: 1. Press the MENU button on the control panel. Press the < > NEXT button until the text "USB Menu" is shown on the first line of the display. Press the < > button to enter the USB menu. Press the < submenus. > or < > buttons to move through the Press the < > button to enter the submenu. Use the procedures in the following table to access and change the USB Menu settings: Submenus Default Setting Enabled Available Settings Enabled Disabled Procedure for Changing Setting Press < > or < > buttons to toggle between Enable and Disable. Press <SELECT> to save the selection. USB This submenu allows you to set up the USB interface. PS Protocol ASCII ASCII RAW Press < > or < > buttons to toggle between ASCII and RAW. [. . . ] C Tray module (one location) (3) Even without uninstalling the tray module, you can clean the feed roller after pulling out the paper tray. D Paper tray (one location) (4) Pull out the paper tray and clean the feed roller. The following procedure explains how to clean the feed roll set in the paper tray. Follow this procedure also when cleaning the feed rolls inside of the printer and the tray module. > The feed roll is a regular replacement part. [. . . ]