User manual OLIVETTI CMS 340 EURO ADDENDUM

[. . . ] Microsoft, Windows and WindowsNT are registered trademarks of Microsoft Corporation of America and other countries. All other company and product names contained in this Operation Guide are trademarks or registered trademarks of their respective companies. The designations TM and ® will not be used in this Operation Guide. No part of this material may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without permission in writing from the Publisher. [. . . ] NOTE: Manual Adjustment: Hold the left mouse button while dragging the watermark image to the Select Diagonal (slanted to the upper right) or select User defined, which enables you to enter your preferred angle (measured counterclockwise from 0 to 360 degrees). user defined: Drag the slider horizontally or enter the value. The angle of the text can be manually adjusted by placing the mouse pointer on the center or end of the text and dragging it to the desired position. NOTE: Manual Adjustment: Hold the left mouse button while dragging the watermark image to the From the Select watermark drop-down list, select the watermark text you wish to delete. Edit your own watermarks by following the steps below. When editing your added watermarks, you can change the watermark text, font, color, size, and style. In the Page selection group box of the Watermark dialog box, choose from All pages, First page only, All pages except first page, or Only on specified pages for printing the watermark text. Select the Print onto cover check box to select the cover page for printing the watermark. For further details, refer to Printing with Covers on page 1-18. EcoPrint reduces the amount of toner placed on the printed page, extending the life of the toner container, making it both economical and ecological. Because toner saturation is reduced, the entire image, text and graphics, is displayed lighter in the printed job. You can also specify cover printing when completing booklet printing settings. The paper used for printing the document body is specified in the Media type drop-down list on the Basic tab. The source of the cover paper is specified in the Media for cover drop-down list on the Publishing tab. A duplex unit must be connected in order to print using the Front inside or Front outside on the Publishing tab. You must also specify Print on both sides on the Basic tab. Although the Cover mode and Page insert may be used simultaneously, they cannot be used with the Transparency interleaving option. From the application's Print dialog box, access the Properties dialog box. Select your desired page arrangement as shown in the following table. Front Print onto Front outside Prints on the outside surface of the front cover Front Front inside Duplex Printing (page 1-10). Prints on the inside surface of the front cover Front Print onto Front outside Print onto Front inside Duplex Printing (page 1-10). Prints on the outside and inside surfaces of the front cover Front and back Inserts blank front and back covers Check Box Selection Front and back Print onto Front outside Cover Insertion Type Prints on the outside surface of the front cover and inserts a blank back cover Front and back Print onto Front Inside Duplex Printing (page 1-10). [. . . ] NOTE: If you do not wish to display the Status Monitor, select Hide the status monitor NOTE: You can also exit the Status Monitor by clicking the Status Monitor window and Status Monitor has two tabs to configure its settings. The Sound Notification tab is configured with the following items. Text to Speech A sound file can be selected if you require an audible notification. Click Browse to search for the sound file. [. . . ]