User manual OLIVETTI D-COLOR MF2000 SET-UP GUIDE

[. . . ] 1-3 What is an ENERGY STAR® product?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Software licence agreement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Explanation of manual conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If "Front Cover" or "Front and Back Cover" is selected, continue with step 11. ­ 11 After all original pages have been scanned, touch [Finish]. ­ If "Front and Back Cover" was selected, the back cover is scanned after the front cover, and then all page spreads are scanned in order. d-Color MF350/250/201Plus 3-123 3 ­ Copy Operations If "Front Cover" was selected, all page spreads are scanned in order after the front cover. 12 Press the [Start] key. 3-124 d-Color MF350/250/201Plus Copy Operations 3 3. 29 Tiling copy images ("Image Repeat" function) An original image can be repeatedly printed on a single sheet of paper. The possible number of repeating images is automatically selected based on the size of the loaded original, the specified paper size and the zoom ratio. The following repeating formats and settings are available. Setting With Margin Without Margin 2/4/8 Repeat Description Multiple copies are printed of the entire image within the specified area. The area around the image appears as a margin. Multiple copies of the selected area of the image are printed to fill the paper; however, a part of the image may be cut off. A fixed number of copies of the selected image area are printed in the paper. The number of repeating copies can be set to 2, 4 or 8 times. However, any part of the image that does not fit within its specific section of the paper is cut off. Original With Margin Without Margin 1 2 3 Position the original to be copied. ­ For details on positioning the original, refer to "Feeding the original" on page 3-27. Load the paper to be used into the desired paper tray. Touch or to display a different list of standard sizes. Touching [Custom Size] displays the Custom Size screen. Touch [X] or [Y] to select the dimension, and then use the keypad to specify the desired value. ­ ­ Touch [Paper Size], select the finished paper size, and then touch [OK]. Touch or to display a different list of paper sizes. 3-130 d-Color MF350/250/201Plus Copy Operations ­ Touch [Zoom], use the keypad to type in the desired value, and then touch [OK]. 3 5 Check the original size, and then touch [OK]. ­ ­ If the original size cannot be detected automatically or to specify the original size, touch [Original Size], and then specify the original size from any of the screens. Touch [Photo Size] to display the Photo Size screen. To cancel changes to the settings, touch [Cancel]. Original Size screen Custom Size screen d-Color MF350/250/201Plus 3-131 3 Photo Size screen Copy Operations ?% 6 7 Can sizes in inches be displayed?% Touch or to display a different list of sizes. Any size can be specified from the Custom Size screen. Touch [X] or [Y] to select the dimension, and then use the keypad to specify the correct value. [. . . ] You may install and use the Profile on a single desktop computer; provided, however, that, notwithstanding anything contrary contained herein, you may not use the Profile on any network system or share, install or use the Profile concurrently on different computers, or electronically transfer the Profile from one computer to another or over a network. You may not make or distribute copies, fix, alter, merge, modify, adapt, sublicense, transfer, sell, rent, lease, gift or distribute all or a portion of the Profile, or modify the Profile or create derivative works based upon the Profile. You acknowledge that the Profile is not intended for any usage which may cause death or physical injury or environmental damage and agree not to use the Profile for such usage. You shall not use the Profile to develop any software or other technology having the same primary function as the Profile, including but not limited to using the Profile in any development or test procedure that seeks to develop like software or other technology, or to determine if such software or other technology performs in a similar manner as the Profile. [. . . ]