User manual OLIVETTI D-COLOR P26 SUPPLEMENTO

[. . . ] Olivetti d-Color P20W/P26W/P26 NETWORK USER'S GUIDE PREFACE Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacuter assumes no responsibility for the results of errors beyond its control, and also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer. While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. [. . . ] The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear. Select [Next] and provide the following information. Enter [Printer name] or IP address, for example: 192. 168. 1. 31. If the above IP address is entered, the Port Name will default to IP_192. 168. 1. 31. Additional port information will be required. Under [Device Type], select [Custom] then [Settings]. Ensure [Port Number] is 9100 and [SNMP Status Enabled] is deselected. Select [Follow the instructions on the screen to finish installing the printer. ] 9. Select [Start], [Settings], [Control Panel and Printers]. Double-click [Add Printer] and then select [Next]. Select [Next]. Microsoft Windows> 57 6. Type printer URL in text box labelled [Connect to a printer in the Internet or your Intranet], e. g. 8. WINDOWS XP NOTE: Windows XP requires administrator privileges. With Windows XP, there are four options for printing using TCP/ IP: > > > > Manufacturers' LPR Microsoft LPR Port 9100 IPP Manufacturers' LPR Please follow the procedure described on page 50. Microsoft LPR To install this port, proceed as follows: 1. Select [Start], [Settings], [Control Panel]. Click [Add Printer] and then select [Next]. Select [Local printer attached to this computer], clear the [Automatically detect and install my Plug and Play printer] check box, and then select [Next]. Select [Create a New Port] and [Type Standard TCP/IP Port]. The [Welcome to the Add Standard TCP/IP Printer Port Wizard] will appear. Select [Next] and provide the following information. Enter [Printer name or IP address], for example: 192. 168. 1. 31. Microsoft Windows> 58 5. 6. If the above IP address is entered, the Port Name will default to IP_192. 168. 1. 31. [Additional Port Information Required] is displayed. [. . . ] Check the network cable is correctly connected. If the network resides in a zone, check the correct zone name is selected in the Chooser. Check the zone name in the utility related to the NIC is the same as the zone name set in NIC. Check AppleTalk, which is displayed at the right bottom of the Chooser, is set to Enable. [. . . ]