User manual OLIVETTI D-COPIA 35

[. . . ] 2-7 3 Preparations Connecting the Cables . 3-2 4 Copy Functions Basic Copying Procedure . 4-1 Placing Originals in the Document Processor . 4-2 Placing a Thick Original on the Platen . [. . . ] The blank part of the print is calculated, and original is reduced and copied. It is not a function to enlarge or reduce by the automatic operation according to the paper size. Standard Zoom 1 2 3 4-4 Press [Zoom]. Press or to select the desired zoom ratio. Press [OK]. The message display returns to the ready screen. The new zoom ratio is registered. OPERATION GUIDE Copy Functions To start copying, place the original on the platen and press [Start]. Variable Zoom Perform the following procedure to make settings for the Variable Zoom mode. 1 2 3 Press [Zoom]. Press or to select Custom and press [OK]. Enter the desired ratio using numeric keys. / 4 Press [OK]. The message display returns to the ready screen. To start copying, place the original on the platen and press [Start]. Collate Mode Multiple originals can be collated. Originals Copies 1 Press [Collate] to select . or 2 3 Enter the desired number of copies. Place the original on the platen and press [Start]. Scanning of the first original will start. Replace the first original with the next one and press [Start]. Mode Black and White Description The original will be scanned in monochrome. The resulting file size for the scan data will be smaller in comparison with the other color modes. The shading of the original will be reproduced. The original will be scanned in full color. 8-Bit Gray 24-Bit Color Selecting the Resolution The higher the resolution value is, the finer the image will be. A higher resolution results in a larger file size and longer scanning time. Preview Click Preview to scan a document so you can review the scanned image. This allows you to specify an area to be scanned and any scanning feature settings to be used for future scans. When a scanning feature is changed and applied, the Preview image is updated for a real-time view of the change. You can define the area to be scanned by dragging the cursor lines with the mouse. Zoom Click Zoom to preview a selected area. Scan Click Scan to scan the area with the specified parameters. You can define the area to be scanned by dragging the cursor lines with the mouse. Exit Click Exit to cancel the current job. 5-2 OPERATION GUIDE Scanning Functions Enhancing Your Image Brightness Adjusts the lightness or darkness of an image. The higher the value, the brighter the image. Contrast Adjusts the range between the darkest and the lightest shades in the image. [. . . ] Turn the power switch off and then back on again. If this message still remains, turn the power switch off, and contact your service representative or authorized service center. Reference -- -- -- page 10-11 Open front cover Remove the paper Paper Empty Add paper Paper Mismatch Please Replace Toner [PRINTER ERROR] Out of Memory [PRINTER ERROR] Engine Panic [PRINTER ERROR] Service Call [SCANNER ERROR] Lamp Error [SCANNER ERROR] AFE R/W Error [SCANNER ERROR] Home Sensor [SCANNER ERROR] NVRAM R/W Fail Toner Low Unlock scanner Power Off and On page 10-4 page 2-1 page 2-1 page 9-1 -- -- -- Toner is running low. Replace the toner container using a new toner kit as soon as possible. [. . . ]