User manual OLIVETTI D-COPIA 400

[. . . ] Legal Restriction On Copying · It may be prohibited to copy copyrighted material without permission of the copyright owner. · It is prohibited under any circumstances to copy domestic or foreign currencies. · Copying other items may be prohibited. v About this User's Manual This User's Manual has been divided into a number of chapters in order to allow even first-time users of the copier to use the product efficiently and effectively. The content of these chapters is summarized below to be used as a reference when using this manual. [. . . ] * This will be displayed when the optional Paper Feeder is installed. Sets whether or not to use automatic magnification (zoom/reduction percentage) when a paper drawer has been selected. Automatically detects the paper size in the supply drawers (1 - 4). When it is to be detected in inches, set this to AtI (automatic detection in inch units); when paper size is to be detected in centimeters, (AB columns) set this to AtC (automatic detection in centimeter units) and when Oficio II size is to be used set this to o2r. * Drawers 2, 3 and 4 will be displayed only when the optional Paper Feeder is installed. Sets the size of paper to be manually fed in. * When using Custom 1 or 2, set the paper size using F22 and F23. on: Enabled oFF: Disabled* AtI: Automatic Detection in Inch units (*AtI: Inch specifications) AtC: Automatic Detection in centimeter units (AB columns) (*Atc: Metric specifications) o2r: Oficio II 6-20 F16 Auto Sizing 6-21 F17 F18 F19 F20 F21 Drawer Paper Size (Drawer 1) Drawer Paper Size (Drawer 2) Drawer Paper Size (Drawer 3) Drawer Paper Size (Drawer 4) Multi-bypass Tray Paper Size 6-21 [Inch specifications] UnI: Universal Size* Ldr: Ledger Horizontal LGr: Legal Horizontal Ltr: Letter Horizontal LtE: Letter Vertical Str: Statement Horizontal Cu1: Custom 1 Cu2: Custom 2 [Metric specifications] UnI: Universal Size* A3r: A3 Horizontal A4r: A4 Horizontal A4E: A4 Vertical A5r: A5 Horizontal b4r: B4 Horizontal b5r: B5 Horizontal For: Folio Horizontal Cu1: Custom 1 Cu2: Custom 2 6-22 6-8 Section 6 COPIER MANAGEMENT Display Items F22 F23 Settings Items Custom 1 Size Custom 2 Size Description Sets the size to be set to the Custom size (1 - 2). * This makes it possible to set the size that do not appear on the operation panel. Available settings [Inch specifications] A3r: A3 Horizontal A4r: A4 Horizontal A4E: A4 Vertical A5r: A5 Horizontal b4r: B4 Horizontal b5r: B5 Horizontal b5E: B5 Vertical b6r: B6 Horizontal* A6r: A6 Horizontal PoS: Postcard For: Folio Horizontal o2r: Oficio II CPF: 11" × 15" Horizontal InP: Irregular Size YYY × XXX (") Y-direction: 3. 88 - 11. 33" X-direction: 5. 88 - 17" [Metric specifications] b6r: B6 Horizontal* A6r: A6 Horizontal Pos: Postcard Ldr: Ledger Horizontal LGr: Legal Horizontal Ltr: Letter Horizontal LtE: Letter Vertical Str: Statement Horizontal o2r: Oficio II CPF: 11" × 15" Horizontal InP: Irregular Size YYY × XXX (mm) Y-direction: 98 - 297mm X-direction: 148 - 432mm 1 - 250 (*250) on: Rotate oFF: No Rotation* Reference Page 6-23 F24 F25 Copy Limit 2-Sided Copy Reverse-side Rotation Setting Margin Shift Limits the number of copies or sets of copies that can be made at one time. Rotates the paper 180 degrees and copies it when both sides of a sheet are to be copied. * This will not be displayed when the optional Duplex Unit is not installed. Inch specifications Metric specifications 2 Press either the Zoom (+) or Zoom (­) key to display "F01". Inch specifications Metric specifications 6-11 Section 6 COPIER MANAGEMENT 3 Press the [Enter] key. Inch specifications Metric specifications 2 Press either the Zoom (+) or Zoom (­) key to display "F02". Inch specifications Metric specifications Sample: User Status Report 3 Press the [Enter] key. Inch specifications Metric specifications 4 Press either the Zoom (+) key or the Zoom (­) key and select "1- (Text + Photos)", "2- (Photos)" or "3- (Text)". Inch specifications Metric specifications 5 Original Image Quality Sets the original image quality that will be selected at the time the copier is turned on. Press the [Enter] key. The display will return to that of Step 2. Inch specifications Metric specifications 1 Display the Default Settings Mode. (Refer to P. 6-11 "Default Settings Mode Operations Procedures". ) Inch specifications Metric specifications 6-12 Section 6 COPIER MANAGEMENT Exposure Mode Sets the copy exposure at the time the copier is turned on to Manual or Automatic. 5 Press the [Enter] key. The display will return to that of Step 2. Inch specifications Metric specifications 1 Display the Default Settings Mode. [. . . ] 9-1 Making copies when the copier is in the Department Management Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 Making copies with clean edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Making enlarged and reduced copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Margin Shift (Default Settings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]