User manual OLIVETTI D-COPIA 8000

[. . . ] Money Stamps Bonds Stocks Bank drafts Checks Passports Driver's licenses In some areas, the "POWER" switch positions are marked "I" and "O" on the copier instead of "ON" and "OFF". The symbol "O" denotes the copier is not completely de-energized but in a standby condition at this "POWER" switch position. If your copier is so marked, please read "I" for "ON" and "O" for "OFF". For a complete electrical disconnection, pull out the main plug. [. . . ] Align the top edge of the original with this mark. Original face up Peep hole 48 SET THE COPY QUANTITY Set the number of copies using the two copy quantity ( from the document glass or copying from SPF. , ) keys when copying · Press the clear key to clear an entry if a mistake is made. · A single copy can be made with the initial setting, i. e. , when "0" is displayed. · Press the right copy quantity key to set the unit digit from 0 to 9. This key will not change the tens digit. · Press the left copy quantity key to set the tens digit from 1 to 9. A4 B5 A5 Tens digit Unit digit EXPOSURE ADJUSTMENT/PHOTO COPYING Exposure adjustment Copy density adjustment is not required for most originals in the automatic exposure mode. To adjust the copy density manually or to copy photographs, the exposure level can be adjusted in five steps manually. The copy resolution used for AUTO and MANUAL ( changed. (p. 55) ) mode can be 5 1 Press the exposure mode selector key to select the MANUAL ( ) mode or PHOTO ( ) mode. 2 Use the light ( ) and dark ( ) keys to adjust the exposure level. If exposure level 2 is selected, the two left-handmost indicators for that level will light up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for that level will light up simultaneously. 49 Automatic exposure adjustment This automatic exposure level will remain in effect until you change it again by this procedure. · When making two-sided copies from the original table, the paper size must be A4, letter. When making two-sided copies from the SPF (d-Copia 201D), A4, B5, A5, letter, legal, and invoice sizes can be used. · When making two-sided copies, the multi-bypass tray cannot be used. · When using two-sided invoice size originals from the SPF (d-Copia 201D), be sure to place them in the landscape orientation. Otherwise, an original misfeed will occur. AA A A A A A A Turn on Long Edge Turn on Short Edge 52 Making two-sided copies 1 2 Place the original(s) on the document glass or in the SPF. (see "ORIGINAL PLACEMENT" (p. 47). Select two-sided copy mode. When copying in a one-sided to two-sided mode: Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 52. 3 Select the copy settings. See "SET THE COPY QUANTITY" (p. 49), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p. 49), and "REDUCTION/ENLARGEMENT/ZOOM" (p. 51). Using the document glass 1 2 Press the start ( ) key. The original is scanned into the unit's memory and the number of the copy quantity blinks in the display. Place the original that you wish to copy onto the rear side of the paper, and press the start ( ) key again. [. . . ] 57 Scanning - Button Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 - OLIVETTI TWAIN. . . . . . . . . . . . . . . . . . . . . . . . . 44 Selecting the paper tray . . . . . . . . . . . . . . . . . . . . 51 Setting the copy quality - AUTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]