User manual OLIVETTI ECR 5000

[. . . ] During cash register operation, all transaction data for the management report are stored in the register's memory. this memory also holds all optional programming information. [. . . ] The memory back-up battery system keeps this information stored in memory when the cash register is turned off or when a power failure occurs. All data stored in memory will be canceled if you unplug the cash register from the electrical wall outlet without back-up battery supply. Load the standard roll of paper tape as explained in the related section of the Instructions Manual. Single digit numbers for months and days must be preceded by a zero (0). Type/Press: [120101] + [#/NS] NOTE: If you wish that the date just entered be printed and displayed in the month/day/year format, type [70] and then press the [RA/ ] key. NOTE: Time is set according to international, or military time (24-hour clock format). To correctly enter this time, simply add 12 to all hours in the PM. Use the [Dept Shift] key for departments from 7 to 12. If tax is required for a particular PLU item, be sure to link the PLU number related to the item to a department that is programmed for tax. Press the [Qty/Time] key to program another feature or exit the program mode by sliding the control switch to the OFF position. Example: Create PLU 1 with a unit price of £2. 69 assigned to Department 3 and then create PLU 3 with a unit price of £5. Type [44444] followed by [1] and then press the [Amt Tend/Total] key to activate the Clerk system. type [444444] and press the [Amt Tend/Total] key. [. . . ] type [444444] and press the [Amt Tend/Total] key. Type a number from 1 to 6 to identify the clerk to whom the secret code will be linked. [. . . ]