User manual OLIVETTI ECR 2550 EURO QUICK REFERENCE GUIDE

[. . . ] Type/Press: [1530] + [Qty/Date] NOTE: If you wish that the time just entered be printed and displayed in the 24-hour format, type [180] and then press the [Void] key. Type [19] followed by [1] and [Void] to print in Spanish, [19] followed by [2] and [Void] to print in French, [19] followed by [3] and [Void] to print in German. To print in English again (the default language), type [19] followed by [0]. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. [. . . ] Remember that up to 24 characters can be entered (spaces included). If you wish to center a writing, you will need to calculate the empty character spaces before and after your string and type the appropriate blank space code (00) in the corresponding places. Use the [Void] key as backspace function to clear an incorrect character entry if necessary. Repeat steps 3 and 4 if you wish to program the remaining three programmable header lines. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. Example: Change the fourth line of the default header to *PLEASE COME AGAIN* with the appropriate spaces before and after to center this new string and using the Character Code Table provided in the Appendix of the Instructions Manual. Type/Press: [3] + [4] + [Return] + [76 00 00] + [56 52 45 41 59 45 00] + [43 55 53 45 00] + [41 47 41 49 54] + [00 00 00 76] + [Check] NOTE: If you wish to use the alphanumeric keypad to type the header PLEASE COME AGAIN, type [00] for the spaces and then press the Dept key corresponding to the letter wanted. If the letter wanted is on the bottom half of the key, firstly press the [Dept Shift] key and then the related [Dept] key. The asterisk can only be entered by typing its corresponding code (76) from the Character Code Table provided in the Appendix of the Instructions Manual. Type the [exchange rate] using up to six digits without specifying any decimal point. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. Press the [Qty/Date] key to program another feature or to exit the program mode by turning the PRG key to the OFF position. Example: Create PLU 1 with a unit price of £2. 69 assigned to Department 3 and name this item Coffee by using the Character Code Table provided in the Instructions Manual and then create PLU 320 with a unit price of £5. 00 assigned to Department 33 and name this item Book by using the alphanumeric keypad. A 5-digit department status can be programmed by using the following options: Dept. Press the [Subtotal w/Tax] key to confirm your entry. The message "DEP n NAME" appears on the operator display and the amount entered is printed along with the caption "DEPT n", where the n in both cases represents the department number. With reference to the Character Code Table provided in the Appendix of the Instructions Manual or by using the alphanumeric keypad, define the department descriptor (max 12 chars, spaces included). Press the [Clear] key to program another feature, otherwise exit the program mode by turning the PRG key to the OFF position. example: Assign a no HDLO , VAT3 , multiple item sale , a price of £2. 50 to an item in Standard Department 1 named Groceries defined using the Character Code Table in the Instructions Manual. [. . . ] Type a number to which the secret code will be linked. Repeat the above operations (from step 4 to step 6) to assign a secret code to the remaining 14 Clerks or use the [Clear] key to exit from Clerk Secret Code programming. If you wish to change the clerk's secret code and the Clerk system is already activated, there is no need to perform step 2 above. To define a clerk name you can use either the Character Code Table provided in the Appendix of the Instructions Manual or you can type the name directly by using the alphanumeric keypad. [. . . ]