User manual OLIVETTI ECR 5800 QUICK REFERENCE GUIDE

[. . . ] Type/Press: [180101] + [#/ST/NS] NOTE: If you wish that the date just entered be printed and displayed in the month/day/year format, type [40] and then press the [Void] key. NOTE: Time is set according to international, or military time (24-hour clock format). To correctly enter this time, simply add 12 to all hours in the PM. [. . . ] Exit the program mode by turning the PRG key to the OFF position. The message "TAX n RATE" appears on the operator display where n is the number representing the VAT rate. Up to five digits can be used, and you MUST enter three digits after the desired decimal place. The tax rate entered followed by its alphanumeric identifier (T1, T2, T3 or T4) is printed. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. This format can be changed, as needed, to one of the other settings below. Type the status number [0, 1, 2 or 3] to select the desired format as indicated in the following table: Status Number 0 1 2 3 Format x x. Press the [-%/RA] key to set the new format. The setting made is automatically printed along with the caption "R-A-". Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. Example: Program the cash register so that two digits are left after the decimal point. The message "PLU PRICE" appears on the operator display and the number 001 is displayed on the left-hand side of the displays to indicate the first PLU number. If you wish to change the PLU number from 001 to another number such as 30, type [030] and then press the [PLU] key. Press the appropriate [Department] key to assign the PLU to a Department from 1 to 20. Use the [Dept Shift] key for departments from 21-40. The message "PLU NAME" is displayed while the PLU number, item price and department number are printed. With reference to the Character Code Table in the Appendix of the Instructions Manual or by using the alphanumeric keypad, define a maximum 10-character description to the PLU item. For example, the item Coffee will have the [43 55 46 46 45 45] character code string if the Character Code Table is used. [. . . ] Type the number of the Clerk whose name is to be defined. The letter "P" appears on the left-hand side of the operator and customer displays while the message "CLERK NAME" is displayed on the operator display. With reference to the Character Code Table in the Appendix of the Instructions Manual, type the string of character codes to define the letters of a name and then press the [Check] key. [. . . ]