User manual OLIVETTI FAX_LAB 105

[. . . ] Ink Jet Fax Fax-Lab 105 INSTRUCTIONS EDITED/PUBLISHED/PRODUCED BY: Olivetti, S. p. A. con unico azionista Gruppo Telecom Italia Direzione e coordinamento di Telecom Italia S. p. A. Printed in Thailand. Code of user manual: 256664K Date of publication: July 2005. Copyright © 2005, Olivetti All rights reserved. No parts of this manual may be photocopied, reproduced or translated into other languages without prior written authorization from Olivetti S. p. A. The manufacturer reserves the right to make any changes to the machine described in this manual, at any time, and without prior warning. [. . . ] The display shows on the top line: DOCUMENT READY and on the bottom line, the default contrast value: "NORMAL". The initial resolution value is: " " (standard). If necessary, change the contrast and resolution values as described in "To adjust the contrast and resolution". Press the desired numeric key, for example than one second. for more 01:TEL NO. From here on, follow the one-touch dialling procedure starting from the steps in which the number and name of the correspondent are set. note If you want, you can print the information saved on the 10 one-touch dialling keys and 50 speed dialling codes (see chapter "To print reports and lists"). TO CHANGE A ONE-TOUCH DIALLING KEY OR SPEED The display shows the digits of the fax number that you associated with it. If the name has also been saved, the display shows this, too. Once the number has been dialled, transmission continues in the ordinary way. DIALLING CODE 1. Follow the one-touch dialling or speed dialling procedure until the display shows: - For one-touch dialling TO SEND A DOCUMENT WITH SPEED DIALLING 1:TEL NO. - For speed dialling 1. The display shows on the top line: DOCUMENT READY and on the bottom line, the default contrast value: "NORMAL". The initial resolution value is: " " (standard). If necessary, change the contrast and resolution values as described in "To adjust the contrast and resolution". Press the key: The display shows: O1:TEL NO. 2. To clear the entire number, press the key: 3. Enter the new telephone number or fax number (max. To confirm the setting, press the key: The display shows: ADDRESS BOOK CODE OR < > 3. Dial the desired speed dialling code, for example . To do this, press the keys: The display shows the digits in the fax number that you assigned to it. If the name has also been saved, the display shows this, too. Once the number has been dialled, transmission continues in the ordinary way. 1:NAME or 01:NAME 8 TO SEND A DOCUMENT WITH ONE-TOUCH OR SPEED TO PRINT REPORTS AND LISTS REPORTS By printing out reports, the fax machine enables you to check the result of all the transactions carried out (transmission and reception), the volume of documents handled and a lot of other useful information. The fax machine prints the following reports: · Power failure report: it is always and automatically printed after a power failure, if there are documents in the memory. Once normal operating conditions have been restored, the fax machine will automatically print a report indicating the number of pages in the memory up to that time that you have lost. In this case, it is advisable to print the activity report to track down the number or name of the persons who sent you the documents that were lost. [. . . ] MH, MR, MMR POWER SUPPLY CHARACTERISTICS Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220-240 VAC or 110-240 VAC (data plate on base of fax machine) Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-60Hz (data plate on base of fax machine) Power absorbed: - in stand-by mode . . . . . . . . . . . . . . . . . . . . 35W ENVIRONMENTAL CONDITIONS Temperature . . . . . . . . . . . . . . . . . [. . . ]