User manual OLIVETTI FAX-LAB 470

[. . . ] Ink Jet Fax Fax-Lab 470 INSTRUCTIONS EDITED/PUBLISHED/PRODUCED BY: Olivetti, S. p. A. con unico azionista Gruppo Telecom Italia Direzione e coordinamento di Telecom Italia S. p. A. Printed in Thailand. Code of user manual: 256652P Date of publication: July 2005. Copyright © 2005, Olivetti All rights reserved. No parts of this manual may be photocopied, reproduced or translated into other languages without prior written authorization from Olivetti S. p. A. The manufacturer reserves the right to make any changes to the machine described in this manual, at any time, and without prior warning. [. . . ] key to return the LAST TX REPORT You can choose the following options: "LAST BROAD. REP. ", "ACTIVITY REPORT", "PRINT: ID LIST" and "PRINT OUT:EXIT". To select one of the options, press the key: / 4. To confirm the selection, press the key: PRINTING CONFIGURATION PARAMETERS AND DATA RELATING TO ONE-TOUCH DIALLING AND SPEED DIALLING 1. Press the key Having printed the report, the fax machine automatically returns to its initial standby status. until the display shows: FAX SET-UP 2. Press the key: Note If you have chosen "PRINT OUT:EXIT", press the the fax machine to the stand-by mode. key to return The display shows: DATE AND TIME 3. Press the key until the display shows: LISTS At any time, you can print complete lists of the installation and setup parameters and print the data saved in the one-touch dialling keys and speed dialling codes. By printing out the lists of installation and setup parameters, you will obtain an up to date report of the default values and those that you have set to adapt it to your operating requirements. PRINT OUT SET-UP 4. Press the key: The display shows: PRINT SETTINGS 5. To view the other available options: "PRINT:ONE TOUCH", "PRINT:SPEED DIAL" and "PRINT OUT:EXIT", press the key: / 6. To confirm the selection, press the key: PRINTING INSTALLATION PARAMETERS AND BLACKLISTED NUMBERS 1. Press the key until the display shows: INSTALLATION 2. Press the key: Having printed the report, the fax machine automatically returns to its initial standby status. Note The display shows: TEL. Press the key until the display shows: If you have chosen "PRINT OUT:EXIT", press the the fax machine to the stand-by mode. key to return PRINT INSTALL. 4. Press the key: The display shows: PRINT: INSTALL 5. To view the other available options: "PRINT:BLACK LIST" and "MENU EXIT", press the key: / 6. To confirm the selection, press the key: 23 MAKING A CALL When you engage the line by lifting the telephone handset, you may use all the telephone functions available on ordinary telephones sold on the market. These also include the R function (REGISTER RECALL, activated by pressing the key) which provides access to the special services made available by the company that manages the telephone network. You can also use the following functions: · Call the correspondent using the fast dialling procedures set, see "Telephoning with one-touch dialling" and "Telephoning with speed dialling". (HOLD) Momentarily hold a telephone call by pressing the key. The call is resumed as soon as the same key is pressed again. [. . . ] (*) = ITU-TS format, Test Sheet no. 1 (Slerexe Letter). (**) = Height without paper support fitted. (***) = Depth without paper support fitted. ELECTRICAL CONNECTION SPECIFICATIONS Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220-240 VAC or 110-240 VAC (see data plate on base of fax machine) Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]