User manual OLIVETTI FAX-LAB 270

[. . . ] Ink Jet Fax Instructions Fax-Lab 220/270 PUBLISHED BY: Olivetti I- Jet S. p. A. Località Le Vieux 11020 ARNAD (Italy) Editors: Olivetti Tecnost, S. p. A. Direzione @ Home/Office Via Jervis, 77 - 10015 IVREA (Italy) Copyright © 2003, Olivetti All rights reserved The manufacturer reserves the right to make any changes to the machine described in this manual, at any time, and without prior warning. This machine has been approved, under the terms of Council Decision 98/482/EC, for Europe-wide connection as a single terminal to an analogue Public Switched Telephone System (PSTN) system. [. . . ] - ERROR CODE XX: if the transaction was not completed due to the cause indicated by the error code (see "Error codes", chapter "Troubleshooting guide"). FAILED TX REPORT - the fax machine will automatically print a report only after each failed transmission. TX REPORT:ALWAYS - the fax machine will automatically print a report after each transmission irrespective of the result. TX REPORT: OFF - the fax machine will not print any report. To return the fax machine to the initial stand-by mode. TO ENABLE/DISABLE THE AUTOMATIC PRINTING OF THE BROADCAST TRANSMISSION REPORT · Dialled Number · Name Until the display shows: FAX SET-UP The display shows: · Received Id DATE AND TIME The display shows: VARIOUS SETTINGS Until the display shows: · Date/Time · Duration · Pages · Result BROADC. REP. :ON / To view the other available option: "BROADC. To return the fax machine to the initial stand-by mode. TO ENABLE/DISABLE THE AUTOMATIC PRINTING OF THE BROADCAST TRANSMISSION DATA Until the display shows: TO ENABLE/DISABLE THE AUTOMATIC PRINTING OF THE FAX SET-UP The display shows: TRANSMISSION AND FAILED TRANSMISSION REPORT DATE AND TIME Until the display shows: The display shows: FAX SET-UP The display shows: VARIOUS SETTINGS Until the display shows: DATE AND TIME The display shows: / DELAY LIST: ON To view the other available option: "DELAY LIST: OFF". To return the fax machine to the initial stand-by mode. VARIOUS SETTINGS Until the display shows: FAILED TX REPORT / To view the other available options: "TX REPORT: ALWAYS" and "TX REPORT: OFF". 19 TO PRINT THE TRANSMISSION, ACTIVITY, BROADCAST TO PRINT THE SETUP PARAMETERS AND THE ONE-TOUCH TRANSMISSION AND CALLER ID REPORTS ON REQUEST DIALLING AND SPEED DIALLING SETTINGS Until the display shows: Until the display shows: PRINT OUT REPORT The display shows: FAX SET-UP The display shows: LAST TX REPORT / To view the other available options: "LAST BROAD. REP. ", "ACTIVITY REPORT", "PRINT: ID LIST", "PRINT OUT:EXIT". Having printed the report, the fax machine automatically returns to its initial standby status. / DATE AND TIME Until the display shows: PRINT OUT SET-UP The display shows: PRINT SETTINGS To view the other available options: "PRINT: ONE TOUCH", "PRINT:SPEED DIAL" and "PRINT OUT: EXIT". To confirm your choice. note If you chose "PRINT OUT:EXIT", press the return the fax machine to the initial stand-by mode. key to Having printed the report, the fax machine automatically returns to its initial standby status. LISTS At any time, you can print complete lists of the installation and setup parameters and print the data saved in the one-touch dialling keys and speed dialling codes. By printing out the lists of installation and setup parameters, you will obtain an up to date report of the default values and those that you have set to adapt it to your operating requirements. note If you have chosen "PRINT OUT: EXIT", press the key to return the fax machine to the initial stand-by mode. TO PRINT THE LIST OF INSTALLATION PARAMETERS AND THE BLACK LIST NUMBERS Until the display shows: INSTALLATION The display shows: TEL. LINE SET-UP Until the display shows: PRINT INSTALL. The display shows: PRINT INSTALL. / To view the other available options: "PRINT:BLACK LIST" and "MENU EXIT". To confirm your choice. note If you chose "PRINT INSTALL. " or "PRINT:BLACK LIST", when the fax machine has finished printing, it returns automatically to the initial stand-by mode. If you have chosen "MENU EXIT", press the chine to the initial stand-by mode. 20 key to return the fax ma- TO MAKE A CALL When you engage the line by lifting the telephone handset, you may use all the telephone functions available on ordinary telephones sold on the market. These also include the R function (REGISTER RECALL, activated key) which provides access to the special servby pressing the ices made available by the company that manages the telephone network. You can also use the following functions: · Call the correspondent using the fast dialling procedures set, see "To telephone with one-touch dialling" and "To telephone with speed dialling". (HOLD) Momentarily hold a telephone call by pressing the key. The call is resumed as soon as the same key is pressed again. Activate the "handsfree" function (model with a built-in TAD only), by pressing the key before or during a telephone call. [. . . ] ITU Communication speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . (14400-12000 Model with a built-in TAD)-96007200-4800-2400 Compression method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MH, MR, MMR · Recording capacity: · Memo · 2 Outgoing messages 14' POWER SUPPLY CHARACTERISTICS · Outgoing messages only function · "Toll saver" function · Transfer message · Fast access from console and remote location · Access code · Message recording · Retention of messages in case of a power failure. (*) = ITU-TS format, Test Sheet no. 1 (Slerexe Letter) with standard resolution, MH compression. [. . . ]