User manual OLIVETTI LINEA 603

[. . . ] PORTABLE TYPEWRITERS Instructions ETP 630 1 2 3 4 5 6 7 8 1 xxxxxx 1½ xxxxx 2 xxxxx 9 10 11 12 13 14 15 16 CONTENTS BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PRELIMINARY OPERATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SETTING THE WORKING PARAMETERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TYPING A TEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 CORRECTING ERRORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INDENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CENTRING TEXT BETWEEN THE MARGINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 RIGHT FLUSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 AUTOMATIC LINE INDENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 HYPHEN AND FIXED SPACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SUBSCRIPT AND SUPERSCRIPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 UNDERLINE AND BOLD FACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 TYPING IN CAPITALS WITH THE FULL STOP, COMMA AND NUMBERS ACTIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 THE LINE FORMAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ARRANGING WORDS OR NUMBERS INTO COLUMNS . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 CREATING AND PRINTING TABLES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 THE PERMANENT MEMORY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 LANGUAGE OF MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 THE DAISY WHEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 THE RIBBON CARTRIDGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 THE CORRECTING TAPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 REPLACING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 KEYS AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 TECHNICAL DATA, NORMS AND SAFETY REGULATIONS. . . . . . . . . . . . . . . . . . . 15 1 BEFORE YOU BEGIN Before you begin, check that the transport blocks have been removed and locate the power cable, by consulting the unpacking instructions printed on the inside of the top of the packaging. The pull-out handle under the keyboard makes the typewriter easy to carry. Safety: Your typewriter conforms to all the current safety regulations and requires the precautions recommended for other electrical devices (radio, television, etc. ). See the "Technical Data, Norms and Safety Regulations" section for further details. [. . . ] + and select a key for STORING A TEXT The text can be stored in the memory as if you were working in normal typewriter mode. You can therefore change the line format parameter settings and use functions such as centring, correction, tabulation and so on. The characters typed appear on the display first and are then printed at the end of each line. They are not stored until they have been printed. Access the memory and select the desired area. When you type the first character the {1-9}, the display. L F, and symbols disappear from Space bar 3. + to close the text and exit from the selected memory area. Press The display will show the memory status. THE PERMANENT MEMORY Your typewriter's permanent memory enables you to store texts which may be edited and/or printed at a later date. It consists of 9 areas, whose status (occupied or vacant) can be viewed and whose contents can be deleted. IF. . The message MEMORY FULL appears, this means that there is no free space left in the memory. Delete the message by pressing and delete a few characters or a text to free space in the memory. ACCESSING THE MEMORY AND SELECTING THE AREA 1. Press , if necessary, to move to the start of the line. The display indicates the amount of space available in the memory. Free areas are indicated by a dash, while those containing a text are indicated by their sequential number (1-9). Select a memory area by typing its number. If the area selected already contains a text, the display shows the end of it together with other symbols: · · · 4. 5. L F CHANGING THE LINE FORMAT When you store a text in the memory, it is assigned the line format present on the machine when the memory was accessed. The line format can be changed before storing the text or while editing it. The new line format is stored together with the text. Access the memory and select the desired area. Press . 3. Change the line format as described in the corresponding section of this manual. The new line format is stored. indicates that the line format is present {1-9} indicates the memory area selected indicates the start of the text Edit the text as required. EDITING AND/OR PRINTING A STORED TEXT A text stored in the memory can be retrieved for editing and/or printing. Access the memory and select the desired area. symbol below the type text symbol Press MODE + MODIFY TEXT. [. . . ] Confirms deletion of the selected text: press Y to delete it or N to abort the operation. SEARCH KEY: Prompts you to type the letters/symbols to be searched for in a text. ELECTRICAL SPECIFICATIONS The table below lists the versions in which this product is manufactured, in accordance with the national electrical and safety codes: Voltage (V) 220-240 120 115 127 100 Current (A) 0. 15 0. 30 0. 30 0. 30 0. 35 Frequency (Hz) 50 50 60 60 50/60 15 ANTI-INTERFERENCE AND SAFETY CODES CE, IMQ, FCC/B, cULus This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]