User manual OLIVETTI OFX 1100

[. . . ] B When you purchase a new device of ours, give a used device similar to the one purchased to our dealer for disposal. the crossed dustbin symbol on the device means that: · When it to be disposed of, the device is to be taken to the equipped waste collection centres and is to be handled separately from urban waste; · FOR OTHER COUNTRIES (NOT IN THE EU) The treatment, collection, recycling and disposal of electric and electronic devices will be carried out in accordance with the laws in force in the country in question. All information included herein is subject to change without notice. Is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual. [. . . ] It is recommended that you use only original ink cartridges. Print quality cannot be guaranteed, nor is there guarantee cover for problems arising from the use of non-original accessories, parts or components. Caution: Before carrying out the procedures listed in this section, read and follow carefully the information on safety standards contained in this guide. With both hands raise the upper part of the printer. Warning: The black (or photo) cartridge must always be inserted into the carrier on the left, the colour cartridge in the carrier on the right. If the cartridge removed is to be reused in the future place it in the storage/protection garage for black and photo cartridges located inside the printer. When installing a new cartridge, remove the protection tape on the cartridge. Note: This procedure illustrates how to replace a colour cartridge, however the same procedure applies for replacing black and photo cartridges. Insert the new cartridge, pressing it towards the back of the printer until it clicks into place. Lift the upper part of the printer and move the support lever. Lower the upper part of the printer until it is completely closed. Note: In the Mac OS X environment, the Toolbox program is available by selecting the icon present on the desktop, or by selecting it from the list of programs installed. The main area of the Toolbox contains icons representing the different tools available. Select all the photos stored in the folder, or just the individual ones you want, and indicate the number of copies to print of each. Specify if the photos are to be printed on a single page, two to a page or four to a page. Choose the type and size of paper to print on. Select the layout for the printed copy: scan multiple pages and print them on a single page; make poster format copies indicating the number of pages over which to fit the image, clone the image the number of times required without resizing, or simply print the image on a single page. Not all types of layout are available if the copy operation is executed with the document to be copied loaded onto the automatic document feeder. Enlarge or reduce the document or photo to be copied, or automatically adjust its size so that it fits onto the paper size selected. Note: Not all the functions for modifying the image size or selecting different layouts are available when the documents for copying are loaded onto the automatic document feeder. Use selection handles to delimit the area of the preview image to scan. Note: When documents are loaded onto the automatic document feeder, pages can be scanned one at a time, or all pages in sequence. [. . . ] The fax memory available is full because too many documents have been received from the scanner; no more documents can be saved. Send the documents present in memory by fax, or delete them. displayed at the end of a failed fax transmission. The memory available on the fax is full because many documents have been received. [. . . ]