User manual OLIVETTI OFX 9600

[. . . ] To confirm the number, press the key: The display shows: note For details on the SMS service, please contact the manager of the telephone network to which you are connected. CENTRE XXXX If the number that appears on the lower line of the display coincides with the number provided by your network operator, skip to step 8, otherwise move on to the next step. Dial the number provided by your network operator. To do this, press the keys: To confirm the number, press the key: TO ACTIVATE THE SMS SERVICE note To activate the SMS service, you must have the Caller ID function (CLIP) activated by the telephone company. 8. 9. To return the fax machine to its initial stand-by mode, press the key: important To activate the SMS service you must set, both for sending and for receiving message, the numbers indicated by the "SMS Service Centre" and provided by your network operator. [. . . ] Afterwards, the fax machine will automatically return to its initial stand-by mode. As in message transmission, you can set some parameters to: - ensure the correct operation of SMS service if you have more than a telephone set connected to the same telephone line (see later on "For an appropriate message (SMS) reception if you own more than one telephone set and only one telephone line"). - configure the fax machine to notify the reception of a message through an acoustic signal (see later on "To configure the fax machine for notifying the reception of a message (SMS) through an acoustic signal"). important To make sure that SMS messages will be received, check that the fax machine is set to connect to the telephone line after at least 2 rings. See the "Changing number of rings" section of the "More sophisticated operations" chapter of the fax machine user's manual. note If the message "MEMORY FULL", "DEL. WRITTEN SMS" appears on display and the fax machine does not allow you to write your message, this means that the memory for written and saved messages is full. At this point, delete at least one of the messages from the memory. Later on see "To delete/edit/send again a message (SMS)". TO READ A MESSAGE (SMS) RECEIVED When the icon appears on display, it means that you have received one or more messages (SMS). At this point, if you want to read them, you must: 1. Press the key: The display shows: SEND SMS 2. Press the keys / until the display shows: SMS RECEIVED XX "XX" is the number that appears in the upper right-hand side corner and it indicates the total number of messages received (max. It is useful if you want to know how many messages you have received and, therefore, how many you can still receive. To confirm the setting, press the key: The display shows: DISPLAY LIST If "MEM ALMOST FULL", "DELETE REC. To confirm the setting, press the key: The display shows from left to right: the reference number which identifies the messages present on the list of messages received (from the oldest message to the most recent one), the icon for messages still unread, the correspondent's telephone number, the text of the message or part of it, and the date and time. To show all the message-related data and the text of the message on the fax machine, press once the keys: / 9. To return the fax machine to its initial stand-by mode, press the key: To stop the text on the display, press again the keys: / If you wish to select the displayed message, skip to step 6, otherwise move on to the next step. To find in the above-mentioned list the message that you wish to select, press the keys: / 6. To select the message, press the key: The display shows: DELETE To return the fax machine to its initial stand-by mode, skip to step 8, otherwise go on with the procedure. You can also choose one of the following options: "ANSWER", "SEND", "EDIT" or "PRINT". ANSWER: to answer a message received (see procedure below). EDIT and SEND: to edit and send a message again (see later on "To delete/edit/send again a message (SMS)"). PRINT: to print the data concerning the message you have just selected and the text of the message (see "To print every single message within a list", section "The lists"). To see one of the other available options, press the keys: / 8. To confirm the setting, press the key: DELETE 7. [. . . ] Press the key: The display shows: SEND SMS 2. Press the keys / until the display shows: / SEND SMS 2. Press the keys until the display shows: SMS SENT or: XX SMS WRITTEN XX "XX" is the number that appears in the upper right-hand side corner and it indicates the total number of messages written and saved (max. It is useful if you want to know how many messages you have saved and, therefore, how many you can still save. [. . . ]