User manual OLIVETTI PG L12EN

[. . . ] The dumping of these devices at unequipped and unauthorized places may have hazardous effects on health and the environment. Offenders will be subjected to the penalties and measures laid down by the law. TO DISPOSE OF OUR DEVICES CORRECTLY: a) Contact the Local Authorities, who will give you the practical information you need and the instructions for handling the waste correctly, for example: location and times of the waste collection centres, etc. b) When you purchase a new device of ours, give a used device similar to the one purchased to our dealer for disposal. The crossed dustbin symbol on the device means that: - when it to be disposed of, the device is to be taken to the equipped waste collection centres and is to be handled separately from urban waste; - Olivetti guarantees the activation of the treatment, collection, recycling and disposal procedures in accordance with Directive 2002/96/CE (and subsequent amendments). 2. [. . . ] It is the best option for printing photographs. > The High Quality setting prints at 1200 x 600dpi and is the best option for printing vector objects such as graphics and text. > The Normal setting prints at 600 x 600dpi and is suitable for most printing jobs. You can select Toner Saving to save toner for some print jobs 2. You can print watermark text behind the main page image. This is useful for marking documents as draft, confidential, etc. You can select up to 999 copies to print consecutively, although you will need to top up the paper tray during such a long print run. Your printed pages can be scaled to fit larger or smaller stationery. PG L12EN/PG L12EN Special User's Guide ­ Operation > 63 3. 4. 5. Using the Advanced button gives you access to the facility to set mirror image printing or negative image printing. A single on-screen button restores the default settings. 6. SETTING FROM WINDOWS CONTROL PANEL When you open the driver properties window directly from Windows, rather than from within an application program, a somewhat more extensive range of settings is provided. Changes made here will generally affect all documents you print from Windows applications, and will be remembered from one Windows session to the next. PCL emulation The main tabs are the General Tab, Advanced Tab and Device Options Tab. PG L12EN/PG L12EN Special User's Guide ­ Operation > 64 General tab 1 2 3 1. 2. This area lists some of the main features of your printer, including optional items. Specifies that the spooler should not delete documents after they are completed. This allows documents to be re submitted to the printer from the spooler instead of printing again from the application program. If you use this option frequently it will require large amounts of disk space on your computer. Specifies whether advanced features, such as pages per sheet, are available, depending on your printer. For normal printing keep this option enabled. If compatibility problems occur you can disable the feature. However, these advanced options may then not be available, even though the hardware might support them. This button provides access to the same setup windows as when printing from applications. Changes made via the Windows Control Panel become the Windows default settings. You can design and specify a separator page that prints between documents. This is particularly useful on a 5. 6. 7. 8. 9. 10. PG L12EN/PG L12EN Special User's Guide ­ Operation > 67 shared printer to help each user find their own documents in the output stack. NOTE The above features are provided by the Windows 2000 operating system and will vary with other operating systems. Device Options tab In this window you can select which optional upgrades are installed on your printer. [. . . ] 42 paper and trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Paper jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Power on LED PG L12EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Preferences Menu . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]