User manual OLIVETTI PGL8L QUICK GUIDE

[. . . ] If Windows detects new hardware, click Cancel. 2 Insert the PG L8L CD-ROM into your computer's CD drive. [. . . ] 3 From the Windows NT Start menu, select Settings, then Printers. 6 Select the port you are using, typically LPT1:, then click on Next. 7 The computer will list different printer manufacturers and models. 8 In the Install from Disk dialog box, in the input box marked "Copy Manufacturer's Files From:", type d:\english\win_nt\driver (assuming d: is your CDROM drive) and confirm with OK. 10 Follow the on-screen instructions to complete installation. Locate cartridge guide rails inside printer (one on each side) and guide pins on each side of cartridge. Align as shown. 3 DOS Remote Control Panel & Status Monitor 1 Insert the PG L8L CD-ROM into your computer's CD drive. 2 At the DOS prompt C:\>, enter the following commands: md dosrcp (creates a dosrcp directory) cd dosrcp (changes to the dosrcp directory) copy d:\english\dos_rcp\*. * (copies files) dospgl8l. bat (installs RCP&SM) Adjust paper guides to width of paper. 4 Pull up extender on face-down stacker until it stops. 5 1 Printer Cable Connector 2 Power Cord Connector 1 Face-up Stacker 2 Face-down Stacker 3 Stacker Extender 4 Manual Feeder 5 Multipurpose Paper Feeder 6 Tray Extender 7 Paper Guides 8 Paper Guides 9 Operator Panel 3 Power Switch Push cartridge into place by pressing down on handle. Guide pins should slide along guide rails. 5 Follow the on-screen instructions to complete installation. Windows 3. x Driver 1 Start Windows. 2 Insert the PG L8L CD-ROM into your computer's CD drive. 3 From the Program Manager, select Run from the File menu. 4 In the Run dialog box, type d:\setup. exe (assuming d: is your CD-ROM drive) and confirm with OK. 5 Follow the on-screen instructions to complete installation. To start RCP for DOS, at the DOS prompt type cd\dosrcp and press Enter, then type dosrcp and press Enter. Envelopes: 1 Insert vertically in multipurpose paper feeder with face to be printed toward front. 2 Adjust paper guides to width of envelopes. 6 Gently close front cover. Operator Panel From Feeder: Paper Jam Clearing Speed 8 ppm Specifications Operating conditions Specifications 10o C / 32. 5o C 20% / 80% relative humidity -20o C / 40o C 20% / 90% relative humidity Power Saving Mode: < Background (35 dBA) Operation: < 48 dBA 90 - 137 VAC, 50/60 Hz or 189 - 259 VAC, 50/60 Hz (depending on model) Power Saving Mode: 10 watts Standby: 25 watts Printing: < 450 watts KS32C6100-33MHz 4 MB standard, expandable to 36 MB 1 SIMM socket SIMM type: EDO (Extended Data Out), 72 pin, 60 ns, 32 bit (no parity) SIMM size: 4, 8, 16, 32 MB Bi-directional parallel port (Compatibility, ECP, Byte, Nibble) PCL 5e 1 Pull jammed paper back out of feeder toward you. 2 Open and close front cover to resume printing. Resolution Image cartridge Image cartridge life 600 x 600 dpi Part #B0255N Storage conditions Noise level 5, 000 @ 5% coverage (A4) (Starter cartridge: 2, 500) Paper, OHP, card stock, labels, envelopes Letter, Legal, Executive, Monarch, COM-10, DL, A4, A5, B5, C5 Minimum size: 3" x 5" (76 mm x 125 mm) Maximum size: 8. 5" x 14" (216 mm x 356 mm) Paper: 16 - 24 lb. (163 g/m2) Paper: Up to 150 sheets (80 g/m2) Other media (OHP, envelopes, labels, etc. ): Up to 10 Face-down: 100 sheets Face-up: 1 sheet (thick paper) W x D x H: 13. 5" (345 mm) x 14. 3" (365 mm) x 8. 8" (224 mm) tray closed 16. 5 lbs. (7. 5 Kg) Up to 6, 000 pages per month Europe: TUV(GS), CB, (EN 60950, 73/23/EEC Directive), EN5502 Class B Power rating 1 ERROR light (on) ERROR light (blink) 2 PAPER light (on) Indicates one of following: · No image cartridge. [. . . ] A one-page printer status sheet will print. With printer on-line, press and hold down until all lights remain lit (not blinking) and printer begins to cycle up (starts feeding paper), then release. [. . . ]