User manual OLYMPUS Μ TOUGH-8010

[. . . ] DIGITAL CAMERA STYLUS TOUGH-8010 / TOUGH-8010 STYLUS TOUGH-6020 / TOUGH-6020 STYLUS TOUGH-3000 / TOUGH-3000 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. The application software and instruction manual PDF file are stored on the internal memory of the camera. [. . . ] Submenu 2 Submenu 3 OFF MANOMETER ON CALIBRATE m/ft m ft Application Cancels the manometer display. Displays the current altitude/water depth (atmospheric/hydraulic pressure) in the shooting standby mode screen. (­10 m to 5, 000 m) Proceed to the setting screen. This displays in feet. When set to [ON], a warning message appears in the monitor as a water depth close to 7 m (22. 9 ft) is reached. 50 EN For information on using the menus, see "Using the Menu" (p. 4). To adjust the altitude/water depth display 1 Use FG to select the current altitude/water depth, and press the A button to set. CALIBRATE 1200 m BACK MENU SET OK Operating the camera by tapping the body [TAP CONTROL] (STYLUS TOUGH-8010/ TOUGH-8010 and STYLUS TOUGH-6020/ TOUGH-6020 only) t (Settings 3) Submenu 2 OFF ON CALIBRATE TAP CONTROL Application Cancels [TAP CONTROL]. Adjusts the tap strength and intervals between multiple taps on each side of the camera body. (top, left, right, & back) Operating during shooting mode (Example: Flash mode) 1 Tap the right or left side of the camera body once. Then tap the top side of the camera once. Tap the camera firmly using the pad of your finger. When the camera is stabilized on a tripod for example, tap control may not work properly. To prevent dropping the camera when using tap control, strap the camera to your wrist. The flash mode selection screen is displayed. 2 Tap the right or left side of the camera body to select a function. 3 Tap the back of the camera body twice to confirm your selection. Operating during playback mode When switched to playback mode by tapping the top of the camera body twice, the operations below can be used. Display next image: Tap the right side of the camera once. Display previous image: Tap the left side of the camera once. Fast forward and reverse: Tilt the camera to the right or the left. FLASH AUTO P 0. 0 WB AUTO ISO AUTO 4 14M EN 51 Return to the shooting mode: Tap the top side of the camera twice. Take a picture: Tap the back of the camera twice (Only for the [a SNOW] mode). Using the LED illuminator as an auxiliary light [LED ILLUMINATOR] (STYLUS TOUGH-8010/ TOUGH-8010 and STYLUS TOUGH-6020/ TOUGH-6020 only) t (Settings 3) Submenu 2 OFF ON When tapping the camera's top LED ILLUMINATOR Application Disables the LED illuminator. Enables the LED illuminator. "Using the LED illuminator" (p. 32) To adjust the tap control 1 Select [CALIBRATE] in Submenu 2 and press the A button. 2 Select the part to adjust with FG and press the A button. 3 Select the [STR] setting with FG and press the I button. 4 Select the [INTVL] setting with FG and press the A button. TOP STR AVG INTVL NORM BACK MENU SET OK Check the operation of the camera by tapping on the camera after making the settings. 52 EN Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridgecompatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer's instruction manual. *1 2 Turn on the printer, and then connect the printer and camera. I button PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer's instruction manual. [. . . ] Where the local Olympus distributor does not issue a separate warranty or where the customer is not in the country where the product was purchased the terms of this worldwide warranty shall apply. 4 Where applicable, this Warranty is valid worldwide. The Olympus authorized service stations listed in this Warranty will gladly honor it. * Please refer to the appended list for the authorized international Olympus service network. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. [. . . ]