User manual OLYMPUS Μ 790 SW

[. . . ] DIGITAL CAMERA Advanced Manual Quick Start Guide Get started using your camera right away. Button operations Menu operations Printing pictures Using OLYMPUS Master Getting to know your camera better Appendix ( Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ( We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] Operations are not guaranteed on home-built computers or computers with an updated operating system. · Operations are not guaranteed when using an added USB port or IEEE 1394 port. · To install the software, you must log on as a user with administrators' privileges. Using OLYMPUS Master Macintosh Mac OS X v10. 3 or later Power PC G3 500 MHz or later Intel Core Solo/Duo 1. 5 GHz or later RAM 256 MB or more Hard disk capacity 500 MB or more Monitor 1, 024 × 768 pixels or more 32, 000 colors or more (16. 77 million colors or more recommended) Other USB port or IEEE 1394 port (FireWire) Safari 1. 0 or later (1. 3 or later recommended) QuickTime 6 or later OS CPU Note · · · · Mac versions earlier than OS X 10. 3 are not supported. Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port. To install the software, you must log on as a user with administrators' privileges. Be sure to remove the media (drag & drop onto the trash icon) before performing the following operations. Failure to do so could result in unstable computer operation and the need to reboot. · Disconnect the cable connecting the camera to the computer · Turn off the camera · Open the camera's battery/card compartment cover EN 45 Windows 1 Insert the CD-ROM into the CD-ROM drive. · The OLYMPUS Master setup screen is displayed. · If the screen is not displayed, double-click the "My Computer" icon and click the CD-ROM icon. 2 Select the display language and click the "OLYMPUS Master 2" button. · When the component installation screen is displayed, click "OK". 3 Click "Next" and follow the on-screen instructions. · When the OLYMPUS Master licensing agreement is displayed, read the agreement and click "Yes" to proceed with the installation. Using OLYMPUS Master 4 When the user information screen is displayed, enter your "Name", select your "Region" and click "Next". 5 When the setup type selection screen is displayed, click "Install". · To select the components to install, select "Custom". · The installation begins. The screen confirming that setup is completed is displayed. · Next, the screen confirming whether to install OLYMPUS muvee theaterPack Trial Version is displayed. To install this software, click "Install". 46 EN Macintosh 1 Insert the CD-ROM into the CD-ROM drive. · The CD-ROM window is displayed. · If the CD-ROM window is not displayed, double-click the CD-ROM icon on the desktop. 2 Double-click the "Setup" icon on the desktop. · The OLYMPUS Master installation screen is displayed. · Follow the on-screen instructions. · When the OLYMPUS Master licensing agreement is displayed, read the agreement and click "Continue" and then "Continue" to proceed with the installation. · The screen confirming that installation is completed is displayed. · You must restart your computer before using OLYMPUS Master. Connecting the camera to a computer 1 Make sure the camera is turned off. · The monitor is off. · The lens cover is closed. Using OLYMPUS Master Monitor 2 Connect the multi-connector on the camera to the USB port on the computer using the provided USB cable. · Refer to your computer's instruction manual to locate the position of the USB port. · The camera turns on automatically. · The monitor turns on and the selection screen for the USB connection is displayed. Connector cover Multi-connector 3 Select [PC], and press o. USB PC EASY PRINT CUSTOM PRINT EXIT [IN] SET OK EN 47 4 The camera is recognized by the computer. · Windows When you connect the camera to your computer for the first time, the computer attempts to recognize the camera. Click "OK" to exit the message that is displayed. The camera is recognized as a "Removable Disk". [. . . ] 300 full charges (varies on usage) Dimensions Weight : 0°C to 40°C (32°F to 104°F) (charging)/ -10°C to 60°C (14°F to 140°F) (operation)/ -20°C to 35°C (-4°F to 95°F) (storage) : 31. 5 × 39. 5 × 6 mm (1. 2 × 1. 5 × 0. 2 in. ) : Approx. 15 g (0. 5 oz) (Battery charger (LI-40C) Power requirements Output Charging time Operating environment Temperature Dimensions Weight : AC 100 to 240 V (50 to 60 Hz) 3. 2 VA (100 V) to 5. 0 VA (240 V) : DC 4. 2 V, 200 mA : Approx. 5 hours : 0°C to 40°C (32°F to 104°F) (operation)/ -20°C to 60°C (-4°F to 140°F) (storage) : 62 × 23 × 90 mm (2. 4 × 0. 9 × 3. 5 in. ) : Approx. 65 g (2. 2 oz) (Using in low temperatures Low temperature operation of the optional Olympus xD-Picture Card and lithium ion battery are guaranteed to 0°C (32°F). [. . . ]