User manual OLYMPUS C-720 ULTRA ZOOM

[. . . ] The "No Picture" message should be displayed in the monitor. Turn the camera off by pressing again. Attach the strap (OPTIONAL) Attach the strap as illustrated to make the camera easier to handle. TURNING ON THE CAMERA Before turning the camera on, press the tabs on the lens cap to remove it. DRIVE button Erase button ( ) Macro/Spot button ( Print button ( ) ) Lens cap Diopter adjustment dial Viewfinder Flash mode button ( / ) Protect button ( ) Card access lamp a. Turn the camera ON (SHOOTING MODE) · Press the power switch to turn on the camera. The lens moves out when the mode dial is not set to The monitor turns on. · To turn off the camera, press the power switch again. . POWER switch Arrow pad ) ( AE lock button Custom button ( ) Rotation button ( OK/Menu button ( ) ) Power switch TIP: To maximize battery life, this digital camera features a power saving mode in which the camera enters a sleep mode after approximately one (1) minute of non-use. [. . . ] · How to turn off only the monitor T Press the (monitor) button. If is pressed again, the monitor turns on. d. Flash Modes This digital camera features multiple flash modes. Flash Mode Description The camera automatically decides if the flash is needed. Reduces incidence of red-eye by emitting pre-flashes to shrink pupil size before firing the main flash. The strobe effect is normal operation for this mode. The flash always fires with every picture. Adjusts the flash for slow shutter speeds. Adjusts the flash for slow shutter speeds, and minimizes red-eye. Turns the flash off for times when flash photography is prohibited or not desired. The flash never fires. Icon Taking still pictures · Remove the lens cap. Set the mode dial to and press the POWER switch. · Point the camera towards a subject, and place the subject on the AF target mark. · Use to select the CARD tab, then press twice to access the CARD SETUP screen. · ALL ERASE should be highlighted. · As a safeguard, this digital camera will ask you to select YES or NO to confirm erasing, as this process permanently deletes all unprotected pictures. Select YES and press . The last picture taken appears in the monitor. Use to scroll though all the images saved on your xD-Picture Card. CONNECTING THE CAMERA TO A COMPUTER TIP: Olympus recommends using the optional AC adapter to ensure a consistent power supply when downloading images. Olympus makes it simple to connect this digital camera to your computer. · Plug the supplied USB cable into the ports on your camera and computer as illustrated at right. and press POWER if the camera · Set the mode dial to does not turn on automatically. The camera starts communicating with the PC. Windows 98 users must install the "USB Driver for Windows 98" software before connecting this digital camera to the computer. Refer to the Software Installation Guide for complete information. Make sure that the camera is turned off before connecting it to your computer. INSTALLING THE CAMERA SOFTWARE You've now mastered the basic functionality of your new Olympus digital camera!You are now ready to begin exploring the possibilities that digital photography brings to your computer. [. . . ] · Movie Mode: Yes, this digital camera records movies!(Movie Mode does not record sound. ) · Two-in-one Pictures: Combine two separate images taken in succession and store them as a single picture. · Close-up Playback: Enlarge the pictures in the monitor to check details of the selected image. · Index Display: View several thumbnail pictures on the monitor at once. [. . . ]