User manual OLYMPUS CAMEDIA C-50 ZOOM QUICK START GUIDE

[. . . ] 1-631-844-5000 Technical Support (USA) 24/7 online automated help: http://support. olympusamerica. com/ Phone customer support: Tel. 1-888-553-4448 (Toll-free) Our phone customer support is available from 8 am to 10 pm (Monday to Friday) ET E-Mail: distec@olympus. com Olympus software updates can be obtained at: http://olympus. com/digital/ 1 Thread the end (small loop) of the strap through the strap eyelet. Loading the card Face the card the correct way and insert it into the battery/card compartment. 3 rest of 2 Thread the that youthe strap through the small loop threaded through the eyelet. Loading/Unloading the battery/card Unloading the card Push the card slowly toward the inside of the card slot with your finger until it stops. Continue to hold the card so that it does not forcibly eject, then remove the card from the slot by pulling it straight out. [. . . ] Press the shutter button all the way (fully). Shooting starts and the card access lamp blinks. Press to avoid accidentally erasing images. To cancel protection, press again. Protect mark Press the shutter button slowly and gently (halfway). Focus locks when the shutter button is pressed halfway. AF target mark CANCEL SELECT GO HQ 4 Press the shutter button all the way to start recording. 5 Press the shutter button all the way to stop recording. Seconds remaining 5 Press to start playback. If is pressed again when the movie playback is finished, the MOVIE PLAYBACK screen appears. To exit the movie playback mode and return to the MOVIE PLAY screen, press Ññ to select EXIT, then press . To turn the camera off, close the lens barrier. The monitor and camera turn off. Names of parts Moving around the Menu screen Zoom lever (W/T)/( / ) Shutter button Self-timer/Remote control lamp Flash mode button ( Erase button ( ) Flash ) Menu functions 1 Press Note: The Top menu and available menu functions vary depending on the mode. (See the Reference Manual for more details. ) 2 top menu 3 If you select MODE MENU in step 2 4 to enter each menu SET CARD PIC CAMERA OFF DRIVE ISO P/A/S/M AUTO Green lamp Orange lamp Viewfinder Remote control receiver Mode dial Macro/Spot button ( Protect button ( ) ) to select Strap eyelet MODE MENU WB to select P CAM PIC CARD SET Brings up CAMERA menu Brings up PICTURE menu Brings up CARD menu Brings up SETUP menu The top menu functions can be changed to your liking in the and modes (SHORT CUT setting). AF target mark Menu functions during shooting Lens barrier VIDEO OUT jack Lens Menu functions during playback CAMERA Selects self-timer shooting or remote control shooting. DRIVE Selects a mode from (single-frame shooting), (sequential shooting), (AF sequential shooting) or BKT (auto bracketing). Exposure mode can be selected from P ( Program auto), A (Aperture priority auto), S (Shutter priority auto), or M (Manual mode). Adjusts the flash intensity. Tripod socket Card access lamp (still pictures) Runs through all saved pictures one after another (slide-show). USB connector DC-IN jack* * Remove the cover before connecting the AC adapter. MOVIE PLAY (movies) Plays back movies. You can also make indexes of still-shots from movies. Connector cover Monitor Monitor button (Quick View/ ) OK/Menu button ( ) ISO P/A/S/M INFO Changes the amount of information displayed on the monitor. Arrow pad (ÑñÉí) (still pictures) Stores printing information required for DPOF printers. DIGITAL ZOOM PANORAMA 2 IN 1 Digitally increases the optical zoom range to a maximum of approximately 12x. [. . . ] Sets the date and time. CARD tab PIC CAM MY MODE SETUP Pressing É or returns to the item selection. MY MODE SETUP MY MODE SETUP SLEEP FILE NAME ¥ The green frame moves to the selected item. ¥ SETUP CARD PIC CAM CAM: CAMERA tab Functions for shooting: selecting drive modes, using digital zoom, etc. PIC: PICTURE tab Functions for adjusting images: selecting record modes, adjusting white balance, etc. CARD: CARD tab Card functions, such as formatting. [. . . ]