User manual OLYMPUS CAMEDIA C-180

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual OLYMPUS CAMEDIA C-180. We hope that this OLYMPUS CAMEDIA C-180 user guide will be useful to you.

Lastmanuals help download the user guide OLYMPUS CAMEDIA C-180.


Mode d'emploi OLYMPUS CAMEDIA C-180
Download

You may also download the following manuals related to this product:

   OLYMPUS CAMEDIA C-180 BASIC MANUAL (4905 ko)

Manual abstract: user guide OLYMPUS CAMEDIA C-180

Detailed instructions for use are in the User's Guide.

[. . . ] "CE" mark cameras are intended for sales in Europe. For customers in North and South America For customers in USA Declaration of Conformity Model Number : C-3020ZOOM Trade Name : OLYMPUS Responsible Party : Olympus America Inc. Address : 2 Corporate Center Drive, Melville, New York 11747-3157 U. S. A. Telephone Number : 631-844-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. [. . . ] T You turned off the camera once and turned it on again. However, in the sleep mode, AE lock is not canceled. T The spot metering/macro mode, drive mode or flash mode was changed. 106 Macro mode shooting -- Taking close-up pictures Allows you to shoot close to the subject (no closer than 0. 2 m (8 inches)) so that you can fill the entire frame with your subject while the zoom lever is pressed to the maximum W position. When your target subject is at the center of the frame as shown in the rightside example below, macro mode shooting with the Spot metering (P. If you are close to a subject, the picture area in the viewfinder is different from the picture that the camera actually records (P. For macro mode shooting, we recommend using the monitor (P. 81). Normal shooting With the macro mode the button repeatedly until (Macro mode) 1 Pressmetering+Macro mode) appears on the control panel. or (Spot Digital ESP (no indication) Macro mode Control panel 2 Take a picture. Supported working range Normal (except macro) : 0. 8 m to (2. 6 ft to ) Macro : 0. 2 m to 0. 8 m (8 inches to 2. 6 ft) ~ Continued on next page 107 Chapter 5 Macro mode shooting -- Taking close-up pictures (Cont. ) Chapter 5 Setting limitations and Default settings (Metering modes) The setting for the Metering modes differs depending on the shooting mode concerned as shown below. Mode dial (Mode menu) S-Prg Setting limitation (­: Not available) Factory default setting ­ Digital ESP Digital ESP or Spot metering is available. P A/S/M/ Any of the 4 Metering modes are available. No selection other than the default setting Digital ESP is available for the S-Prg mode except for the Movie mode. For the Movie mode, Digital ESP or Spot metering is available. Pictures with differently sized images cannot be connected. Panorama shooting is possible for up to 10 pictures. Shutter button Shutter button Decide the composition of each picture so that the left (right for connecting pictures from right to left) edge of the new picture and the right (left for connecting pictures from right to left) edge of the previous picture overlap exactly. ~ Continued on next page 111 Panorama shooting (Cont. ) Chapter 5 to shooting. 5 Press on finish panorama screen disappear, and the camera returns Frames the edges of the to the normal shooting mode. Setting limitations and Default settings (Panorama shooting) The setting for the Panorama shooting differs depending on the shooting mode concerned as shown below. Mode dial (Mode menu) S-Prg Setting limitation Factory default setting (­: No setting) Available ­ P A/S/M/ Panorama shooting does not work in the Movie mode. Available ­ Panorama shooting does not work in the A/S/M/ mode. During panorama shooting, the flash is disabled. The Panorama mode is only available with the OLYMPUS CAMEDIA-brand SmartMedia cards. The camera itself cannot edit panorama pictures. To connect each picture, the CAMEDIA Master software that comes with this camera is required. Your computer's memory may be insufficient to perform the panorama editing if you take too many panorama pictures in the HQ/SHQ modes. Images are saved in JPEG format when panorama shooting is done in the TIFF mode. [. . . ] The exposure is determined by the time the shutter is open (shutter speed) and the amount of light that passes through the lens (aperture). ISO A method for indicating film speed by the International Organization for Standardization (ISO) (e. g. Higher ISO values indicate greater sensitivity to light, so images can be exposed even in low-light conditions. JPEG (Joint Photographic Experts Group) A compression format for color still images. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS CAMEDIA C-180

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS CAMEDIA C-180 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag