User manual OLYMPUS CAMEDIA E-500

[. . . ] ENGLISH 2 FRANÇAIS 30 ESPAÑOL 58 DEUTSCH 86 For customers in North and South America For customers in USA Declaration of Conformity Model Number : E-500 Trade Name : OLYMPUS Responsible Party : Address : Two Corporate Center Drive, P. O. Box 9058, Melville, NY 11747-9058 U. S. A. Telephone Number : 1-631-844-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. [. . . ] This may cause lens damage, color failure, ghosting on the CCD, or may possibly start a fire. Condensation may form inside the camera when there is a sudden extreme change in temperature (such as when moving from indoors to outdoors). Acclimatize the camera to the temperature (e. g. by putting the camera into a plastic bag) before use. If the camera has not been used for a long time, mold may form or the camera may malfunction. Before using the camera, check that the camera works properly. Do not touch electric contacts on cameras and interchangeable lenses. Remember to attach the cap when removing the lens. Do not place the camera near anything that could be affected by magnetism (e. g. Doing so may destroy the data on these items. En LCD monitor Do not push the monitor forcibly; otherwise the image may become fuzzy, resulting in a playback mode failure or damage to the monitor. If the monitor is damaged, be careful not to get any of the liquid crystals from the monitor in your mouth. If liquid crystals get on your limbs or clothes, wash them off. A strip of light may appear on the top/bottom of the monitor. When a subject is viewed diagonally in the camera, the edges may appear to zigzag on the monitor. This is not a malfunction; It will be less noticeable in playback mode. In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may change temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm place. A LCD monitor exhibiting poor performance due to low temperatures will recover in normal temperatures. The LCD monitor is made with high-precision technology. However, black spots or bright spots of light may appear on the LCD monitor. These spots may not be uniform in color and brightness depending on their characteristics or the angle at which you are viewing the monitor. This is not a malfunction. 10 Attaching the strap 1 Thread one end of the strap through the strap eyelet on the camera. 2 Thread the end of the strap through the ring, then thread it through the stopper as indicated by the arrows. 3 Thread the strap back through the other hole of the stopper. En 4 5 Pull the other side of the strap tight, making sure that it is fastened securely. [. . . ] Doing so could destroy stored pictures and prevent storage of pictures you have just taken. · When taking pictures against strong backlight, the area of the picture in shadow may appear colored. En 25 Playback 1 Press the q (playback) button. q button · 2 En Use to select images you want to view. a Displays the frame that is stored 10 frames back. b Displays the previous frame. d Displays the next frame. c Displays the frame that is stored 10 frames ahead. · To exit the playback mode, press the q button. · Pressing the shutter button halfway resumes the shooting mode. 26 What you can do with OLYMPUS Master software The provided software CD includes OLYMPUS Master software for viewing and editing images. Once installed, you can take advantage of a variety of viewing and editing features as shown below. [. . . ]