User manual OLYMPUS CWPC-01

[. . . ] Instruction Manual CWPC-01 Water Resistant Case For µ-mini DIGITAL/Stylus Verve Thank you for buying the CWPC-01 Water Resistant Case. To ensure safe and correct operation of this product, please read this instruction manual carefully. Keep this instruction manual handy for future reference. Improper use may result in internal to the camera from water leakage. [. . . ] This product is made of polycarbonate resin with high impact resistance, but it could be damaged by scraping against rocks or other hard objects. Striking or dropping it against a hard object may also break it. This product its not designed to absorb impacts and protect the camera inside. When this product is subjected to strong impacts or when heavy objects are placed on it, the digital camera inside may be damaged. When this product is not used for a long time, the waterproof packing and other parts may deteriorate, leading to a decline in water resistant performance. Before use, always perform the preliminary test and the final check. When a flash is used, shadows may appear at the edges of the picture. This is especially noticeable when taking wide-angle pictures in the macro mode. Do not use the following chemicals for cleaning, corrosion prevention, prevention of fogging, repair or other purposes. Applying any of these to the product directly or indirectly (with the chemicals in vaporized state) may cause cracking under high pressure or other problems. Chemicals which cannot be used Explanation Do not clean the product with alcohol, gasoline, Volatile organic solvents, thinner or other volatile organic solvents or with chemical detergents chemical detergents etc. Anticorrosion agent Do not use anticorrosion agents. The metal parts use stainless steel or brass, and washing with pure water is sufficient. Do not use adhesive for repairs or other purposes. When repair is required, please contact your dealer or nearest Olympus Service Station. Adhesive E-6 Do not perform operations other than specified in this instruction manual, do not remove or modify parts other than specified, and do not use parts other than specified. shall be in no way responsible for accidents involving immersion of a digital camera in water. shall not pay any compensation for accidents (injury or material damage) that may occur during use of this product. E-7 1. Preparations Check the contents of the package. Check that all accessories are in the box. Contact your dealer if accessories should be missing or damaged. Water Resistant Case Instruction manual (this manual) Authorized distributors list/ Authorized service centres list E-8 Names of the parts Hand strap Hand strap rings Mode dial knob Shutter button Lens window Buckle lock levers Buckle opener/closer levers (grip) Buckle hooks Quick View button Power switch button Zoom button Cross button OK/Menu button LCD monitor window Waterproof packing Shade hood Note : The controls on the water-resistant case marked "" correspond to the controls with the same names on the digital camera. The controls on the case operate the corresponding functions on the digital camera. For more details about these functions, refer to the digital camera's instruction manual. E-9 Master the basics. Before taking any pictures, make sure you have mastered the basics of using the case. How to press the shutter button Press the shutter button gently, so that there is no movement of the camera. Also take care not to cover the lens with your hand. Note: · For detailed instructions on shutter operation, refer to the digital camera's instruction manual. How to Use the zoom button The case is equipped with a zoom button that allows you to operate the zoom button of the installed digital camera. How to use the mode dial The case is equipped with a mode dial knob hat allows you to operate the mode dial of the installed digital camera. After installing the digital camera in the case, seal the case and confirm that the mode dial can be operated. E-10 2. [. . . ] Use air or a soft fiber-free cloth to thoroughly wipe water or dirt from between the front and rear lids, buttons, etc. CAUTION : · If any water remains between the front and the rear lids, it may spill inside when the case is opened. Take special care to wipe off all water drops. · When opening the case, make sure that no water can drip from your hair or body onto the case and the camera. · Before opening the case, make sure that your hands or gloves are free of sand, fibers or other foreign matter. [. . . ]