User manual OLYMPUS D-380

[. . . ] DIGITAL CAMERA C-120 D-380 REFERENCE MANUAL <Click Here> CAMERA OPERATION CONNECTING THE CAMERA TO A PC DIGITAL CAMERA C-120/D-380 REFERENCE MANUAL Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. For customers in Europe "CE" mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. [. . . ] To cancel the index function, select CANCEL and press . INDEX INDEX CANCEL EXIt SELECt GO The index is stored as a still picture in a different record mode from the original picture. Record mode when the movie is shot HQ SQ Record mode when stored as an index SQ1 (1024 × 768 pixels) SQ2 (640 × 480 pixels) · The frames at the beginning and end of a movie cannot be selected. · The interval between the frames that are automatically picked out varies depending on the recording time of the movie. · You cannot create an index from movies stored on a card with a write-protect seal. · You cannot create an index if there is insufficient memory space in the internal memory or on the card. 72 Playback Camera settings Turning the beep sound off (Beep sound) You can turn the volume of the beep sound used for button operations or warnings to OFF. 1 2 3 4 5 Display the top menu in the shooting mode. · Open the lens barrier. · Press . Press to select MODE MENU. SEtUP CARD PIC CAM SEtUP CARD PIC CAM Press to select the SETUP tab, then press . , then ALL RESEt REC VIEW Press to select OFF. The beep sound turns off. To close the menu, press ALL RESEt REC VIEW Camera settings twice. OFF ON · The beep sound setting remains even when the lens barrier is closed. · The beep sound can also be turned ON and OFF from the playback mode. 73 Formatting (Card setup/Memory setup) This function lets you format cards or the internal memory. Formatting prepares cards to receive data. Before using non-Olympus cards or cards which have been formatted on a PC, you must format them with this camera. · All existing data, including protected data is erased when the card or the internal memory is formatted. Once erased, pictures cannot be restored, so make sure that you do not erase important data. · To format the internal memory, do not insert the card. · To format the card, insert the card before starting formatting. 1 2 3 4 Camera settings Display the top menu in the shooting mode. · Open the lens barrier. · Press . Press Press Press . to select MODE MENU. to select CARD tab, then press . 5 Press press to select YES, then . 74 SEt CARD PIC CAM CARD SEtUP When formatting a card FORMAt CAUtION ERASING ALL YES NO SELECt GO When formatting a card Formatting (Card setup/Memory setup) Formatting can also be executed from the playback mode. · Never open the card cover or remove the batteries during formatting as this may cause malfunction of the card. · Never connect or disconnect the AC adapter during formatting as this may cause malfunction of the card. · Cards with a write-protect seal cannot be formatted. Remove the seal before formatting the card. Do not reuse the removed seal. 75 Camera settings Copying pictures to the card (Memory backup) You can copy (backup) all the image data stored in the internal memory to the card. The image data in the internal memory is not erased by copying it to the card. You must insert the card before copying. 1 2 3 4 5 Camera settings Display the top menu in the playback mode. · Press · Press with the lens barrier closed. . Press to select MODE MENU. Press then press to select BACKUP, . Press to select MEMORY >> CARD, then press All image data stored in the internal memory is copied to the card. SEt CARD EDIt PLAY . Press to select the CARD tab, then press . CARD SEtUP BACKUP BACKUP MEMORY CARD CANCEL EXIt SELECt GO · Never open the card cover, remove the batteries, or connect or disconnect the AC adapter during copying as this may cause malfunction of the card. [. . . ] · If the camera is not connected correctly, a malfunction occurs in the computer. · Date and time information of image files is not accurately displayed. · If the card cover of the camera is opened while connecting to the computer, the "untitled" icon does not disappear from the desktop. When the computer has recognized the camera, the Apple Image Capture software dialog appears. 1 2 From the "Download To" menu, select a destination folder. [. . . ]