User manual OLYMPUS DS-2800

[. . . ] DIGITAL VOICE RECORDER INSTRUCTIONS EN INSTRUCTIONS FR MODE D'EMPLOI ES INSTRUCCIONES Thank you for purchasing an Olympus Digital Voice Recorder. Please read these instructions for information about using the product correctly and safely. Keep the instructions handy for future reference. To ensure successful recordings, we recommend that you test the record function and volume before use. EN Introduction · The contents of this document may be changed in the future without advanced notice. [. . . ] 4 Press the + button to select [Start], then press the OK/MENU button. · The display changes to [File Erase !] and erasing will start. All Erase File Erase Cancel QP DICT DS2800 029 / 031 File Erase Start Cancel BACK [Erase Done] is displayed when the file is erased. File numbers will be reassigned automatically. File Erase ! QP DICT DS2800 029 / 030 Erase Done Notes · An erased file cannot be restored. · Files cannot be erased in the following cases. - The SD card lock is turned on ( P. 8). 28 Erasing Erasing all files in a folder 2 All files in a folder can be erased simultaneously. 1 Select the file you want to erase. 2 Press the ERASE button. 3 QP DICT DS2800 029 / 030 All Erase File Erase Cancel EXIT 2 Erasing 4 3 Press the + button to select [All Erase], then press the OK/MENU button. 4 Press the + button to select [Start], then press the OK/MENU button. · The display changes to [All Erase !] and erasing will start. All Erase File Erase Cancel QP DICT DS2800 E / 030 All Erase Start Cancel BACK [Erase Done] is displayed when the files are erased. Any locked files in the folder will be reassigned new file numbers in ascending order. All Erase ! QP DICT DS2800 E 000 / 000 Erase Done Notes · The erasing process may take up to 10 seconds. · Files cannot be erased in the following cases. - The SD card lock is turned on ( P. 8). EN 29 Erasing Partially erasing a file 2 3 You can erase a selected file in part. 1 Start playback for the file you want to erase partially. 2 Press the ERASE button at the point to start erasing. QP DICT VCVA DS2800 E 2 Erasing EN · While playback continues, [Partial Erase] will appear on the display. · If you press the F2 ( ) button, the file will skip (F. Skip) to the file end and playback will stop, and that will be set to the end position of the partial erase automatically. · If you press the F1 ( ) button, the file will skip (B. Skip) to the start position of the partial erase and resume playback. The confirmation setting of the end position of the partial erase is continuing. 134 / 134 3 H 45 M 02 s 01 H 55M 25s INDEX INSERT SPEED 45 M 02 s 01H 55 M 23s Partial Erase EXIT 3 Press the ERASE button at the point to end erasing. · The erase starting point (time) set in step 2 and the ending point (time) set in this step will alternate on the display for 8 seconds. · If you playback to the end of file, that will mark the end position for the partial erase automatically. QP DICT VCVA DS2800 E 134 / 134 1 H 05 M 01 s EXIT Partial Erase Start INSERT SPEED QP DICT VCVA DS2800 E 134 / 134 1 H 45 M 32 s EXIT Partial Erase End INSERT SPEED 30 Erasing 4 Press the ERASE button to confirm erase. 4 · The display changes to [Partial Erase!] and erasing will start. QP DICT VCVA E DS2800 134 / 134 EXIT 1 H 20 M 35 s Partial Erase !INSERT SPEED When [Erase Done] appears on the display, partial erase is complete. QP DICT VCVA DS2800 E 134 / 134 EXIT 2 Erasing 1 H 20 M 35 s Erase Done INSERT SPEED Notes · If the ERASE button is not pressed within 8 seconds after the [Partial Erase Start] and [Partial Erase End] are alternately displayed, the recorder will revert to stop status. · An erased file cannot be restored. · Files cannot be partial erased in the following cases. - The SD card lock is turned on ( P. 8). EN 31 3 Advanced operations Menu list sMenu setting (While the recorder is stopped, press the OK/MENU button) Main menu Second layer Setting Ref. page Lock File Menu Information The file information is displayed. P. 36 [Off], [On] P. 37 3 Menu list EN Record Menu Rec Mode [QP], [SP] P. 23 Mic Sense [Dictation], [Conference] P. 22 VCVA [Off], [On] P. 24 Backlight Display Menu [On], [Off] P. 40 Contrast Program contrast level [01]~[12] (Default is [06]). P. 42 LED [On], [Off] P. 41 Languages [English], [Deutsch], [Français], [Español], [Italiano], [] P. 39 Device Menu (To the next page) 32 Menu list Main menu Second layer Setting Ref. page Beep [On], [Off] P. 43 Devices Menu Power Save In order of [5 minutes], [10 minutes], [30 minutes], [1hour] and [Off]. P. 14 Time & Date In order of hour, minute, year, month and day. P. 16 USB Class [Composite], [Storage] P. 47 3 Menu list Reset Settings Returns the menu settings to their initial state. P. 45 Format Initializes the card. P. 44 Card Info. [Remain], [Capacity] P. 9 System Info. [Model Name], [Version], [Serial] P. 46 File Menu (To the page 32) Notes · The selectable language varies depending on the countries where the product was purchased. · Items appear in bold letters in the "Setting" column to indicate that they are the initial settings. EN 33 Learning to use the menu To navigate through the different options in the menu, use the menu list flow chart ( P. 32, P. 33) and the following steps to modify or change any settings. 3 Press the OK/MENU or 9 button. · Move to the setting of the selected menu items. 4 Press the + or ­ button to move to the menu item to be set. F1, F3 button Record Menu Rec Mode Mic Sense VCVA 3 Learning to use the menu EN OK/MENU button +, - button 9, 0 button BACK EXIT 5 Press the OK/MENU or 9 button. · Move to the setting of the selected item. Rec Mode QP SP 1 Press the OK/MENU button. · The [Main Menu] screen will appear on the display ( P. 32). Main Menu File Menu Record Menu Display Menu Device Menu BACK EXIT 6 Press the + or ­ button to change the setting. EXIT 7 Press the OK/MENU button to complete the setup screen. · If you press the 0 or F1(BACK) button, the setting will be cancelled and it will return to the menu. [. . . ] Ce symbole [Poubelle rayée conformément à la directive annexe 2006/66/EC annexe II] indique que la collecte des batteries usagées se fait séparement dans les pays EU. Veuillez ne pas jeter les batteries dans les ordures ménagères. Veuillez utiliser les systèmes de collection disponibles dans votre pays pour l'enlèvement des batteries usagées. Le symbole [poubelle sur roue barrée d'une croix WEEE annexe IV] indique une collecte séparée des déchets d'équipements électriques et électroniques dans les pays de L'UE. [. . . ]