User manual OLYMPUS DW-90

[. . . ] Main Features · The recorder has three recording modes: HQ (High Quality) mode, SP (Standard Playback) mode, and LP (Long Playback) mode. · The Variable Control Voice Actuator (VCVA) reduces memory usage by pausing recording when it senses silence. · Recorded sound files can be stored in three separate folders (up to 100 files per folder). · Back lighting to illuminate the LCD panel allows you to read the display in the dark. [. . . ] · If "FULL" appears on the display, you cannot record in the selected folder. In such a case, erase unnecessary files (see "Erasing from folder A or B" or "Erasing from folder S"). · There is one subfolder for each day of the year. 1 2 3 Note If you leave the recorder untouched for 8 seconds or longer before you press the ERASE button in step 7, Erase mode will be canceled, and the recorder will enter Stop mode. Repeat steps 1 to 4 in "Alarm Playback Function. " The month indicator flashes. Press the 9/+ or 0/­ button to select the month of the alarm you want to cancel. Press the PLAY button to register this month setting for alarm cancellation. Continue to select the date, hour and minute of the desired alarm cancellation. When you set the minute, "On" flashes on the display. Press the 9/+ or 0/­ button to select "OFF. " A set alarm playback is canceled. Press the STOP button to close the menu. · Fast playback is approximately 30% faster than normal playback. · When fast playback of a file is over, the recorder will play back the next file at normal speed. If you once press the STOP button and start playback again, the recorder will play back files in normal speed as well. · No sound is heard from the built-in speaker during fast forwarding or rewinding. · The end of the file is located by pressing and holding the 9 button during fast forwarding. The recorder will pause at the end of the file. If you do not release the 9 button, the recorder will continue fast forward. · The beginning of the file is located by pressing and holding the 0 button during rewinding. The recorder will pause at the beginning of the file. If you do not release the 0 button, the recorder will continue rewinding. Moving Files Between Folders (MOVE) You can move a file recorded in folder A or B to the other. The moved file is added at to the end of the destination folder. 1 2 Choose the file you want to transfer and press the PLAY button to play it. * * You can move the file during playback pause as well. 4 5 Press and hold the MENU/FOLDER button for 1 second or longer while the file is playing. Playback stops, and "MOVE" flashes on the display. The destination folder and the number of the moved file appear on the display, and moving is completed. Notes · You cannot move files between folder S and the other folders. · If the destination folder is full (100 files), "FULL" appears on the display, and you cannot move the file to that folder. E2-2797-03 AP0311 Schedule Alarm Playback Function This is useful for reviewing your daily appointments and reminders. Using the Microphone Stand When you place the recorder on a desk, etc. [. . . ] Speaker: Maximum power: Earphone jack: Power supply: Continuous battery use time: Dimensions: Weight: Hold the STOP button, and hold the ERASE button for 2 seconds or longer. "CLEAR" and "YES" appear alternately on the display for 8 seconds. Press and hold the ERASE button again within 4 seconds. All files in all folders are erased, and the recorder is reset to its default settings. Note Before making connections, make sure that the recorder is stopped. 2 Click on the , , or . [. . . ]