User manual OLYMPUS FE-5010

[. . . ] DIGITAL CAMERA FE-5010/X-915 FE-5000/X-905 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] 43) pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the final image. "The light is caught in the picture". Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Shutter button "No picture is taken when the shutter button is pressed". X Cancel sleep mode. To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on. Date and time function Y MD TIME "Date and time settings return to the default setting". CANCEL MENU ---- -- -- -- -- YMD If the batteries are removed and left out of the camera for about a day*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. "Setting the date and time" (p. 13) Press the K button to set a shooting mode. 42 EN Error message When one of the messages below is displayed on the monitor, check the corrective action. Error message Corrective action Card problem Insert a new card. Card problem Use a computer to cancel the read-only setting. Internal memory problem · Insert a card. · Erase unwanted images. *1 Card problem · Replace the card. · Erase unwanted images. *1 Card problem · Use kl to select [CLEAN CARD], and press the B button. Take out the card, wipe the contact area (p. 47) with a soft, dry cloth, and then load the card again. · Use kl to select [FORMAT], and press the B button. Next, use kl to select [YES], and press the B button. *2 Internal memory problem Use kl to select [MEMORY FORMAT], and press the B button. Next, use kl to select [YES], and press the B button. *2 Internal memory/Card problem Take pictures before viewing them. Problem with selected image Use photo retouch software, etc. If the image still cannot be viewed, the image file is corrupted. [. . . ] 32 POWER SAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Print Reservations (DPOF) . . . . . . . . . . . . . . . . . . . 38 Protecting images 0 . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]