User manual OLYMPUS LS-100

[. . . ] Contact our Customer Support Center for the latest information relating to product names and model numbers. · The utmost care has been taken to ensure the integrity of the contents of this document. In the unlikely event that a questionable item, error, or omission is found, please contact our Customer Support Center. · Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect of the product, repair performed by the third party other than Olympus or an Olympus authorized service station, or any other reason is excluded. Trademarks and registered trademarks · IBM and PC/AT are the trademarks or registered trademarks of International Business Machines Corporation. [. . . ] Make sure that the amount of memory remaining is sufficient before recording ( P. 39). · If the directional microphone function is used, you cannot change the [PCM] setting in the [Rec Mode] other than [44. 1 kHz/16 bit]. You use the all modes in the [MP3] or [WMA] of the [Rec Mode]. You can configure whether to adjust the recording level automatically or to adjust it manually. Setting: [Manual]: Recording is performed by manually adjusting the recording level. When the [Rec Level] is set to [Manual] you can configure the limiter function. [Auto]: Recording is performed by automatically adjusting the recording level. This is useful for when you will be recording right away. Setting: This recorder is equipped with a limiter function that corrects the recording level down to an appropriate range in cases where a loud noise is suddenly picked up. This prevents distortion caused by an excessive recording level. [Limiter On]: Enables the limiter function, thus preventing distortion when recording. You can select whether to play by file or folder, or all files stored in the recorder. Setting: [File]: Stop after playing back the current file. [File Repeat]: Play the current file repeatedly. [Folder]: Play files continuously in the current folder until the last file and stop. [Folder Repeat]: Play all files in the current folder continuously. [All]: Play all files in the selected memory continuously and stop. [All Repeat]: Play all files in the selected memory continuously and repeatedly. · · · In [File] mode, when the recorder comes to the end of the last file in the folder, [End] flashes for two seconds on the display and the recorder stops at the start of the last file. In [Folder] mode, when the recorder comes to the end of the last file in the folder, [End] flashes for two seconds on the display and the recorder stops at the start of the first file in the folder. In [All] mode, after playing the last file in the folder, the recorder will start playing from the first file in the next folder. When it comes to the end of the last file in the recorder, [End] flashes for two seconds on the display and the recorder stops at the start of the first file in the recorder. 37 Menu Setting Method 4 Play Menu (Continued) Reverb You can enjoy the reverberant sound of various space sizes such as from the recording studio to the dome. Setting: [Normal]: Disables the reverb function. [. . . ] Built-in stereo speakers (During playback mode) 26 h. 35 h. Linear PCM format 96 kHz 24 bit 44. 1 kHz 16 bit 6 Other Information Notes · The above values are strictly rough guides. · Battery life is measured by Olympus. It varies greatly according to the type of batteries used and the conditions of use. 68 Specifications and design are subject to change without notice. Declaration of Conformity Model Number : LS-1000 Trade Name : DIGITAL VOICE RECORDER Responsible Party : OLYMPUS IMAGING AMERICA INC. [. . . ]