User manual OLYMPUS LS-5

[. . . ] LINEAR PCM RECORDER LS-5 Linear PCM Recorder INSTRUCTIONS EN Thank you for purchasing an Olympus Digital Voice Recorder. Please read these instructions for information about using the product correctly and safely. Keep the instructions handy for future reference. To ensure successful recordings, we recommend that you test the record function and volume before use. Introduction · The contents of this document may be changed in the future without advanced notice. [. . . ] DVM is an audio pickup system which allows you to record by focusing on sound from any direction. From expansive stereo recording to high directivity recording, DVM represents the latest in directional control methods that allow you to switch to a single exclusive microphone. Setting: [Off]: Record in natural stereo sound. [Wide]: Record in expansive stereo sound. [Standard]: Record in slight directivity stereo sound in the front direction. [Narrow]: Record in directivity stereo sound. [Zoom]: Record in high directivity sound. (Monaural recording) · The directional microphone function has been designed so that this capability will be elicited only with the built-in stereo microphone. Please note that the recorder will become unable to record normally when using other commercially available microphones. · You can use directional microphone only when [PCM] setting in [Rec Mode] is set to [44. 1kHz/16 bit]. 4 Menu Setting Rec Level Zoom Mic Menu Setting Method 4 Rec Menu (Continued) Rec Monitor Select whether or not to output audio while recording from the earphone jack. Setting: [On]: Enables the recording monitor function. Sound will not be output from the EAR jack. · When the external speaker is connected while recording, there is a risk that audio feedback will occur. It is recommended that you use earphones for the recording monitor, or turn [Rec Monitor] to [Off] while recording ( P. 27). When [Rec Monitor] is set to [Off] no sound will come out of the earphones while you are recording ( P. 27). · 4 Menu Setting Plug-inPower External microphones which are supported by plug in power can also be used. Whether or not to supply power to external microphones can be configured. Setting: [On]: When the plug-in power function is activated, power will be supplied to the connected external microphone. Select this when external microphones supported by plug-in power are connected ( P. 30). Select this when external microphones not supported by plug-in power are connected. · Turn the plug-in power function to [Off] when an external microphone not supported by plug-in power is connected, as there is the risk that noise may be generated while recording. Phantom power cannot be supplied, even when the plug in power function is set to [On]. · V-Sync. Rec Voice sync recording starts when a voice louder than the voice sync level (detection level) is detected. [. . . ] Please use the return and collection systems available in your country for the disposal of this product. Applicable Product : LS-5 L'indication "CE" signifie que ce produit est conforme aux exigences concernant la sécurité, la santé, l'environnement et la protection du consommateur. Le symbole [poubelle sur roue barrée d'une croix WEEE annexe IV] indique une collecte séparée des déchets d'équipements électriques et électroniques dans les pays de L'UE. Veuillez ne pas jeter l'équipement dans les ordures domestiques. [. . . ]