User manual OLYMPUS MR-100 QUICK START GUIDE

[. . . ] QUICK START GUIDE HDD Music Player m:robe MR-100 Thank you for purchasing this OLYMPUS HDD Music Player-m:robe MR-100. This Quick Start Guide contains instructions for setup prior to use of this product. [. . . ] The charging display appears and the LED of the device blinks. POWER CHARG ING MENU LED After charging, the LED and the CHARGING display disappear. Setting up your m:trip Installing the supplied Music/Photo Organization Software "m:trip" A Turn on your PC and insert the supplied CD-ROM into the CD-ROM drive. The screen below appears. B Click the [m:trip] button. After the Install Wizard screen appears, follow the on-screen instructions. C Click [Finish] when the InstallShield Wizard Complete screen appears. Installation of m:trip is complete. If you are prompted to reboot your PC after installation, reboot your PC. To run m:trip A Double-click the m:trip icon on the desktop to start the software. You will need to register your m:robe in the user registration screen when using "m:trip" for the first time. For details on operations and instructions for "m:trip", refer to the online Help. To browse the online Help, click [Help] at the top of the m:trip screen. Importing music to m:trip You can import music from audio CDs. A Insert an audio CD into your PC. m:trip runs automatically and the screen below appears. B Click the [Import from audio CD] button on your PC screen. Importing of the audio CD starts. Transferring music to your m:robe Turning on your m:robe A Press POWER. POWER MENU (See other side) Connecting to your PC Connect your m:robe to your PC. A Connect the dedicated USB cable to your PC. B Connect the dedicated USB cable to the cradle, or connect the cable directly to your m:robe. C Place your m:robe in its cradle. To USB jack Cradle (supplied) C PC B A To USB jack B To PC connecting jack Starting transfer After you connect your m:robe to your PC, m:trip automatically runs. Click [Start] in the screen, which is displayed by clicking [Sync. ] in the bottom right of your PC's screen, to start transferring. During transfer, the CONNECT display appears on your m:robe. When the transfer is complete, the transfer indicator stops on the screen. Click the [Remove m:robe] button on the m:trip screen, and then remove the dedicated USB cable from the cradle or your m:robe. CONNECT DO NOT DISCONNECT! Listening music from your m:robe Checking the battery You can check the battery indicator on the display. Indicator is in the lower left corner of the display. The battery indicator : Battery is fully charged / : Low battery : Charge the battery MAIN MENU MUSIC LIST BROWSE MUSIC SETTINGS DEVICE SETTINGS 01:15 02:30 Using the Touch Pad This m:robe has a touch pad system. [. . . ] · All other company and product names are registered trademarks and/or trademarks of their respective owners. · The screen fonts used by this product belong to Ricoh corporation. Printed in CHINA U1-NG0626-01 YC0410 [. . . ]