User manual OLYMPUS MR-F20

[. . . ] USER'S MANUAL Digital Audio Player MR-F20 Series Introduction Thank you for purchasing the Olympus Digital Audio Player MR-F20 Series. · The product information this USER'S MANUAL conveys is subject to change without notice. Contact an authorized Olympus service center with the product name and model number for the latest information. · While every care has been taken in the preparation of this USER'S MANUAL, if you find any errors, omissions, or points which are unclear, please contact an authorized Olympus service center. [. . . ] · The recording sound sensitivity depends on the distance to the sound source. · You cannot record correctly if the battery power is not enough. Tips · You can listen to what you are recording with the earphones. · The higher bit rate you set, the higher music quality will be provided, but the size is larger. · The recorded files are named automatically, such as VR001. WMA, VR002. WMA. . . , and stored in the VOICE folder in WMA format. Recording 46 Recording over Line-in connection 1 Connect the line-in cable to your m:robe and the external audio device. To the audio (Line-out) jack of an external audio device Recording 2 Press the button while the playback screen is displayed. 3 Press the button to select "Record, " then press the OK/EQ button. 4 Press the button to select "Source, " then press the OK/EQ button. 5 Press the button to select "Line In, " then press the OK/EQ button. 6 In playback stop mode, play the external audio device, then press and hold the Recording starts. To pause/resume recording Press the button. button. 47 To stop recording Press the button. Listening to recorded music files While the playback screen is displayed, press the button to display the Navigation search screen, select "RECORD": "LINE-IN": the desired music file, then press the button. Setting the sound quality Press the button while the playback screen is displayed, then select "Record": "Line Quality": the desired bit rate. Recording Deleting recorded music files Refer to "Deleting files" (g page 28). Notes · If the memory is full, recording stops automatically, and the file is saved up to the point where recording stopped. · You cannot record correctly if the battery power is not enough. Tips · You can listen to what you are recording with the earphones. · The higher bit rate you set, the higher music quality will be provided, but the size is larger. · The recorded files are named automatically, such as AD001. WMA, AD002. WMA. . . , and stored in the LINE-IN folder in WMA format. 48 Setting Auto Sync When music is recorded, a new file is created at where no sound is recorded. 1 Press the 2 Press the 3 Press the 4 Press the button while the playback screen is displayed. button to select "Record, " then press the OK/EQ button. button to select "Auto Sync, " then press the OK/EQ button. button to select "On, " then press the OK/EQ button. "On": Creates music files track by track. "Off": Creates one music file including all tracks. Recording To cancel Auto Sync Select "Off" in step 4, then press the OK/EQ button. 49 Listening to FM radio About the radio receiver screen A D E B C FM MODE A Mode indication (FM) B Time indication H C Remaining battery power indication I D Total number of stored frequencies/ Current selected preset number indication E Preset ( )/Manual ( ) mode indication F Frequency range indication G On air ( indication )/Mute ( ) F Listening to FM radio G J H FM recording indication I Frequency indication J Direction of frequency search indication 50 Receiving a radio station 1 Press and hold the 2 Press the button. The FM receiving screen appears. To mute the FM broadcast Press the button. , " then press the OK/EQ The mode select screen appears. button to select "FM MODE Changing the receiving mode You can switch from Manual mode to Preset mode and vice versa. [. . . ] · Olympus will not compensate for any damage or loss (including cost when purchase/ obtain audio files) incurred as a consequence of a failure of this product. Postage and packing costs are the responsibility of the sender. · When sending this product to us for maintenance, pack the product with sufficient cushioning to avoid damage during transportation. Use a door-to-door package delivery service or registered parcel mail so that you have proof of sending the product. [. . . ]