User manual OLYMPUS RF-11

[. . . ] In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specified, the explanation about these illustrations is provided for TG-810. Step 1 Checking the contents of the box or Digital camera Strap Lithium Ion Battery (LI-50B) USB cable (CB-USB8) AV cable (CB-AV3) USB-AC adapter (F-2AC) OLYMPUS Setup CD-ROM Other accessories not shown: Warranty card Contents may vary depending on purchase location. Step 2 4 Preparing the Camera Step 3 5 Shooting and Playing Back Images "Preparing the Camera" (p. 14) "Shooting, Playback, and Erasing" (p. [. . . ] 2 Tap the right or left side of the camera body to select a function. 3 Tap the back of the camera body twice to confirm your selection. Calibrate m/ft m ft When set to [On], a warning message appears in the monitor as a water depth close to 7 m (22. 9 ft) is reached. Flash Auto P 0. 0 WB AUTO ISO AUTO To adjust the altitude/water depth display 1 Use FG to select the current altitude/water depth, and press the A button to set. Calibrate 4 14M NORM MENU Tap the camera firmly using the pad of your finger. 1200 m When the camera is stabilized on a tripod for example, tap control may not work properly. Set OK Exit MENU To prevent dropping the camera when using tap control, strap the camera to your wrist. 56 EN For information on using the menus, see "Setup menu" (p. 6). Operating during playback mode When switched to playback mode by tapping the top of the camera body twice, the operations below can be used. Display next image: Tap the right side of the camera once. Display previous image: Tap the left side of the camera once. Fast forward and reverse: Tilt the camera to the right or the left. Return to the shooting mode: Tap the top side of the camera twice. Take a picture: Tap the back of the camera twice (Only for the [a Snow] mode). Check the operation of the camera by tapping on the camera after making the settings. Using the LED illuminator as an auxiliary light [LED Illuminator] t (Settings 3) Submenu 2 Off On LED Illuminator Application Disables the LED illuminator. "Using the LED illuminator" (p. 38) When tapping the camera's top To adjust the tap control 1 Select [Calibrate] in Submenu 2 and press the A button. 2 Select the part to adjust with FG and press the A button. For details, refer to the printer's instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer's instruction manual. I (right) Multi-connector USB cable (supplied) Printing images at the printer's standard settings [Easy Print] In the setup menu, set [USB Connection] to [Print]. 50) 1 2 Display the image to be printed on the monitor. "Viewing images" (p. 23) Easy Print Start Custom Print OK Turn on the printer, and then connect the printer and camera. 3 4 Press I to start printing. To print another image, use HI to select an image, and press the A button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. EN 59 Changing the printer's settings for printing [Custom Print] Submenu 4 Off/On*1 Application The image is printed with a border around it ([Off]). The image is printed to fill the entire paper ([On]). The number of images per sheet ([Pics/Sheet]) is selectable only when [Multi Print] is selected in Step 3. 1 2 3 Follow Steps 1 and 2 for [Easy Print] (p. Use FG to select the print mode, and press the A button. Submenu 2 Application This prints the image selected in Step 6. This prints all images stored in the internal memory or card. This prints one image in a multiple layout format. This prints an index of all images stored in the internal memory or card. [. . . ] When proof of purchase is not presented with this Warranty Certificate. 4 This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. 5 Olympus' sole liability under this warranty shall be limited to repairing or replacing the product and any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect in the product, and in particular any loss or damage caused to any film or lenses or other equipment or accessories used with the product or for any loss resulting from delay in repair, is excluded. Notes; 1 This Warranty is in addition to and does not affect the customer's statutory right. 2 lf you have any queries regarding this Warranty, call any of the Olympus authorized service stations listed in the instructions. Notes regarding warranty maintenance 1 This Warranty will only be valid if the Warranty Certificate is duly completed by Olympus or the dealer. Make sure that your name, the name of the dealer, the serial number and the year, month and date of purchase are all completed. [. . . ]