User manual OLYMPUS SP-600UZ

[. . . ] DIGITAL CAMERA SP-600UZ Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. The application software and instruction manual PDF file are stored on the internal memory of the camera. [. . . ] Operate with the TV remote control. The factory default settings differ according to the region where the camera is sold. EN 43 To play back camera images on a TV Connection via AV cable 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Open the connector cover in the direction of the arrow. Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Connection via HDMI cable 1 On the camera, select the digital signal format that will be connected ([480p]/[720p]/[1080i]). 2 Connect the TV and camera. When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not match the input setting of the TV, the signal format is changed first to 720p and then to 480p. For details on changing the input setting of the TV, refer to the TV's instruction manual. When the camera is connected to the computer or the like by the USB cable, do not connect the HDMI cable to the camera. Open the connector cover in the direction of the arrow. HDMI micro connector Connect to the HDMI connector on the TV. HDMI cable (type D/sold separately: CB-HD1) 3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera). " 4 Turn on the camera, and use HI to select the image for playback. For details on changing the input source of the TV, refer to the TV's instruction manual. Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV. When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority. Depending on the TV's settings, the displayed images and information may become cropped. 44 EN For information on using the menus, see "Using the Menu" (p. 4). To operate images with the TV remote control 1 Set [HDMI CONTROL] to [ON], and turn off the camera. 2 Connect the camera and TV with an HDMI cable. "Connection via HDMI cable" (p. 44) 3 First turn on the TV, and then turn on the camera. Viewing the image immediately after shooting [REC VIEW] t (Settings 3) Submenu 2 REC VIEW Application OFF The image being recorded is not displayed. This allows the user to prepare for the next shot while following the subject in the monitor after shooting. This allows the user to make a brief check of the image that was just taken. Operate by following the operation guide that is displayed on the TV. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI CONTROL] to [OFF] and operate using the camera. ON Even when set to [ON], you can resume shooting while the image is being displayed. Saving battery power between shots [POWER SAVE] t (Settings 3) Submenu 2 OFF Automatically rotating images shot with the camera in a vertical position during playback [PIC ORIENTATION] t (Settings 3) PIC ORIENTATION During shooting, the [y] (p. 38) setting on the playback menu is set automatically. This function may not work properly if the camera is facing up or down during shooting. Submenu 2 Application Information about the vertical/ horizontal orientation of the camera during shooting is not recorded with images. [. . . ] When this Warranty Certificate is not returned with the product. When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and date of purchase, the customer's name, the dealer's name, and the serial number. When proof of purchase is not presented with this Warranty Certificate. 4 This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. [. . . ]