User manual OLYMPUS SP-610UZ

[. . . ] DIGITAL CAMERA SP-610UZ Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV. When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority. Open the connector cover in the direction of the arrow. HDMI micro connector Connect to the HDMI connector on the TV. HDMI cable (type D/sold separately: CB-HD1) 52 EN For information on using the menus, see "Setup menu" (p. 6). Type C Type D (CB-HD1) 3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera). " For details on changing the input source of the TV, refer to the TV's instruction manual. 4 Turn on the camera, and use HI to select the image for playback. Depending on the TV's settings, the displayed images and information may become cropped. To operate images with the TV remote control 1 Set [HDMI Control] to [On], and turn off the camera. 2 Connect the camera and TV with an HDMI cable. "Connection via HDMI cable" (p. 52) 3 First turn on the TV, and then turn on the camera. Operate by following the operation guide that is displayed on the TV. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the camera. Saving battery power between shots [Power Save] s (Settings 2) Submenu 2 Off Changing the display language [l] [l s (Settings 2) Submenu 2 l Application Power Save Application The language for the menus and error messages displayed on the monitor is selected. Cancels [Power Save]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. Languages On To resume standby mode Press any button. EN 53 For information on using the menus, see "Setup menu" (p. 6). Setting the date and time [X] [X t (Settings 3) X "Date, time, time zone, and language" (p. 16). To select the date display order 1 Press I after setting Minute, and use FG to select the date display order. 2 Press the A button to set. X Y MD Time To check the date and time Press the INFO button while the camera is turned off. The current time is displayed for approx. 26 00 : 00 Date order Cancel MENU Y/M/D Set OK Choosing home and alternate time zones [World Time] t (Settings 3) World Time You will not be able to select a time zone using [World Time] if the camera clock has not first been set using [X]. Submenu 2 Home/Alternate x*1 z*1, 2 *1 *2 Submenu 3 x z -- -- Application The time in the home time zone (the time zone selected for x in submenu 2). The time in the travel destination time zone (the time zone selected for z in submenu 2). Select the travel destination time zone (z). In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on. When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (z). Restoring data in the camera [Data Repair] t (Settings 3) Data Repair Playback will become available by performing [Data Repair] when the Photo surfing function is not activated properly. [. . . ] 4 This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. 5 Olympus' sole liability under this warranty shall be limited to repairing or replacing the product and any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect in the product, and in particular any loss or damage caused to any film or lenses or other equipment or accessories used with the product or for any loss resulting from delay in repair, is excluded. EN 79 Notes; 1 This Warranty is in addition to and does not affect the customer's statutory right. 2 lf you have any queries regarding this Warranty, call any of the Olympus authorized service stations listed in the instructions. Trademarks · IBM is a registered trademark of International Business Machines Corporation. · Microsoft and Windows are registered trademarks of Microsoft Corporation. [. . . ]