User manual OLYMPUS SP-800UZ

[. . . ] DIGITAL CAMERA SP-800UZ Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. The application software and instruction manual PDF file are stored on the internal memory of the camera. [. . . ] Selects the type and volume of the shutter sound. Selects the image playback volume. BEEP VOLUME SOUND TYPE SHUTTER SOUND 8 q VOLUME *1 *2 VOLUME OFF (No Sound)/ LOW/HIGH OFF (No Sound) or 5 levels of volume Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback. Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television. Resetting the file names of pictures [FILE NAME] s (Settings 2) Folder name DCIM Submenu 2 Application This resets the sequential number for the folder name and file name whenever a new card is inserted. *1 This is useful when grouping images on separate cards. Even when a new card is inserted, this continues the numbering for the folder name and file name from the previous card. This is useful for managing all image folder names and files names with sequential numbers. FILE NAME Folder name 100OLYMP File name Pmdd0001. jpg RESET AUTO 999OLYMP Pmdd9999. jpg *1 The number for the folder name is reset to 100, and the one for the file name is reset to 0001. Automatic numbering Automatic numbering Month: 1 to C (A=October, B=November, C=December) Day: 01 to 31 Pmdd EN 43 Adjusting the CCD and the image processing function [PIXEL MAPPING] s (Settings 2) PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. Setting the date and time [X] t (Settings 3) X "Setting the date, time and time zone" (p. 13) To select the date display order 1 Press I after setting Minute, and use FG to select the date display order. X Y MD TIME To adjust the CCD and the image processing function Press the A button when [START] (Submenu 2) is displayed. 2010 . 26 12 : 30 Date order CANCEL MENU Y/M/D SET OK The camera checks and adjusts the CCD and the image processing function at the same time. Adjusting the brightness of the monitor [s] s (Settings 2) s To adjust the monitor brightness 1 Use FG to adjust the brightness while viewing the screen, and then press the A button. s BACK MENU SET OK 44 EN For information on using the menus, see "Using the Menu" (p. 4). Choosing home and alternate time zones [WORLD TIME] t (Settings 3) WORLD TIME You will not be able to select a time zone using [WORLD TIME] if the camera clock has not first been set using [X]. Submenu 2 x HOME/ALTERNATE y x*1 y*1, 2 *1 *2 Submenu 3 Application The time in the home time zone (the time zone selected for x in submenu 2). The time in the travel destination time zone (the time zone selected for y in submenu 2). -- -- Select the home time zone (x). Select the travel destination time zone (y). In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on. When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (y). Playing back images on a TV [TV OUT] t (Settings 3) TV OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV's video signal type. Submenu 2 VIDEO OUT PAL HDMI OUT HDMI CONTROL 480p, 576p/720p/ 1080i OFF ON Submenu 3 NTSC Application Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. Connecting the camera to a TV in European countries, China, and so on. Operate with the TV remote control. The factory default settings differ according to the region where the camera is sold. EN 45 To play back camera images on a TV Connection via AV cable 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Open the connector cover in the direction of the arrow. Multiconnector Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Connection via HDMI cable 1 On the camera, select the digital signal format that will be connected ([480p, 576p]/[720p]/ [1080i]). 2 Connect the TV and camera. When set to [1080i], "1080i" format takes priority for HDMI output. [. . . ] 2 lf you have any queries regarding this Warranty, call any of the Olympus authorized service stations listed in the instructions. Notes regarding warranty maintenance 1 This Warranty will only be valid if the Warranty Certificate is duly completed by Olympus or the dealer. Make sure that your name, the name of the dealer, the serial number and the year, month and date of purchase are all completed. 2 Since this Warranty Certificate will not be re-issued, keep it in a safe place. 3 Any request for repair by a customer in same country where the product was purchased shall be subject to the terms of the warranty issued by the Olympus distributor in that country. [. . . ]