User manual OLYMPUS STYLUS 9010

[. . . ] DIGITAL CAMERA STYLUS-9010 /-9010 STYLUS-7040 /-7040 STYLUS-5010 /-5010 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. The application software and instruction manual PDF file are stored on the internal memory of the camera. [. . . ] When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (y). Playing back images on a TV [TV OUT] t (Settings 3) TV OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV's video signal type. Submenu 2 VIDEO OUT PAL HDMI OUT HDMI CONTROL 480p/720p/1080i OFF ON Submenu 3 NTSC Application Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. Connecting the camera to a TV in European countries, China, and so on. Operate with the TV remote control. The factory default settings differ according to the region where the camera is sold. 44 EN For information on using the menus, see "Using the Menu" (p. 4). To play back camera images on a TV Connection via AV cable 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. STYLUS-9010/ -9010 STYLUS-7040/ -7040 STYLUS-5010/ -5010 Multi-connector Multi-connector Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Connection via HDMI cable 1 On the camera, select the digital signal format that will be connected ([480p]/[720p]/[1080i]). 2 Connect the TV and camera. When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not match the input setting of the TV, the signal format is changed first to 720p and then to 480p. For details on changing the input setting of the TV, refer to the TV's instruction manual. When the camera is connected to the computer by the USB cable, do not connect the HDMI cable to the camera. EN 45 STYLUS-9010/ -9010 STYLUS-7040/ -7040 STYLUS-5010/ -5010 HDMI micro connector HDMI micro connector HDMI micro connector HDMI cable (type D/sold separately) Connect to the HDMI connector on the TV. 3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera). " For details on changing the input source of the TV, refer to the TV's instruction manual. 4 Turn on the camera, and use HI to select the image for playback. Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV. When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority. Depending on the TV's settings, the displayed images and information may become cropped. To operate images with the TV remote control 1 Set [HDMI CONTROL] to [ON], and turn off the camera. 2 Connect the camera and TV with an HDMI cable. "Connection via HDMI cable" (p. 45) 3 First turn on the TV, and then turn on the camera. Saving battery power between shots [POWER SAVE] t (Settings 3) Submenu 2 OFF POWER SAVE Application Cancels [POWER SAVE]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. ON Operate by following the operation guide that is displayed on the TV. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI CONTROL] to [OFF] and operate using the camera. To resume standby mode Press any button. 46 EN Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridgecompatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer's instruction manual. *1 2 Turn on the printer, and then connect the printer and camera. STYLUS-9010/ -9010 STYLUS-7040/-7040 STYLUS-5010/-5010 Multi-connector PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer's instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer's instruction manual. USB cable (supplied) Printing images at the printer's standard settings [EASY PRINT] In the [SETUP] menu, set [USB CONNECTION] to [PRINT]. 4) I button 1 Display the image to be printed on the monitor. "Viewing images" (p. [. . . ] 2 Since this Warranty Certificate will not be re-issued, keep it in a safe place. 3 Any request for repair by a customer in same country where the product was purchased shall be subject to the terms of the warranty issued by the Olympus distributor in that country. Where the local Olympus distributor does not issue a separate warranty or where the customer is not in the country where the product was purchased the terms of this worldwide warranty shall apply. 4 Where applicable, this Warranty is valid worldwide. [. . . ]