User manual OLYMPUS SZ-20

[. . . ] DIGITAL CAMERA SZ-10/SZ-20 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] Connecting the camera to a TV in European countries, China, and so on. Set the signal format to be given priority. If the TV setting does not match, it is changed automatically. Operate with the TV remote control. The factory default settings differ according to the region where the camera is sold. EN 51 For information on using the menus, see "Setup menu" (p. 6). To play back camera images on a TV Connection via AV cable 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Open the connector cover in the direction of the arrow. Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) 1 2 3 4 Connection via HDMI cable On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]). Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera). " Turn on the camera, and use HI to select the image for playback. When the camera is connected to the computer by the USB cable, do not connect the HDMI cable to the camera. Open the connector cover in the direction of the arrow. HDMI micro connector (type D) Type A Connect to the HDMI connector on the TV. HDMI cable (sold separately: CB-HD1) 52 EN For information on using the menus, see "Setup menu" (p. 6). Type C Type D (CB-HD1) For details on changing the input source of the TV, refer to the TV's instruction manual. When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority. Depending on the TV's settings, the displayed images and information may become cropped. To operate images with the TV remote control 1 Set [HDMI Control] to [On], and turn off the camera. 2 Connect the camera and TV with an HDMI cable. "Connection via HDMI cable" (p. 52) 3 First turn on the TV, and then turn on the camera. Operate by following the operation guide that is displayed on the TV. With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen. If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the camera. Saving battery power between shots [Power Save] s (Settings 2) Submenu 2 Off Changing the display language [l] [l s (Settings 2) Submenu 2 l Application Power Save Application The language for the menus and error messages displayed on the monitor is selected. Cancels [Power Save]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. Languages On To resume standby mode Press any button. EN 53 For information on using the menus, see "Setup menu" (p. 6). Setting the date and time [X] [X t (Settings 3) X "Date, time, time zone, and language" (p. 17). To select the date display order 1 Press I after setting Minute, and use FG to select the date display order. 2 Press the A button to set. X Y MD Time To check the date and time Press the INFO button while the camera is turned off. [. . . ] The Olympus authorized service stations listed in this Warranty will gladly honor it. * Please refer to the appended list for the authorized international Olympus service network. Disclaimer of Warranty Olympus makes no representations or warranties, either expressed or implied, by or concerning any content if these written materials or software, and in no event shall be liable for any implied warranty of merchantability or fitness for any particular purpose or for any consequential, incidental or indirect damages (including but not limited to damages for loss of business profits, business interruption and loss of business information) arising from the use of inability to use these written materials or software. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages, so the above limitations may not apply to you. 78 EN Trademarks · IBM is a registered trademark of International Business Machines Corporation. · Microsoft and Windows are registered trademarks of Microsoft Corporation. [. . . ]