User manual OLYMPUS SZ-30MR

[. . . ] DIGITAL CAMERA SZ-30MR Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] Computers without a factory-installed OS and home-built computers 50 EN For information on using the menus, see "Setup menu" (p. 6). Selecting the camera sound and its volume [Sound Settings] r (Settings 1) Submenu 2 Sound Type q Volume Volume Sound Settings Submenu 3 1/2/3 0/1/2/3/4/5 0/1/2/3/4/5 Application Selects the camera sounds (operation sounds, shutter sound, and warning sound). Selects the operation volume of camera buttons. Resetting the file names of pictures [File Name] s (Settings 2) File Name Folder name DCIM Folder name 100OLYMP File name Pmdd0001. jpg Submenu 2 Application This resets the sequential number for the folder name and file name whenever a new card is inserted. *1 This is useful when grouping images on separate cards. Even when a new card is inserted, this continues the numbering for the folder name and file name from the previous card. This is useful for managing all image folder names and files names with sequential numbers. Reset 999OLYMP Pmdd9999. jpg Auto Automatic numbering Automatic numbering Month: 1 to C (A=October, B=November, C=December) *1 The number for the folder name is reset to 100, and the one for the file name is reset to 0001. Pmdd Day: 01 to 31 EN 51 For information on using the menus, see "Setup menu" (p. 6). Adjusting the image processing function [Pixel Mapping] s (Settings 2) Pixel Mapping This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. Adjusting the brightness of the monitor [s] s (Settings 2) s To adjust the monitor brightness 1 Use FG to adjust the brightness while viewing the screen, and then press the A button. s To adjust the image processing function Press the A button when [Start] (Submenu 2) is displayed. The check and adjustment of the image processing function starts. Back MENU Set OK Playing back images on a TV [TV Out] s (Settings 2) TV Out The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV's video signal type. Submenu 2 Video Out HDMI Out HDMI Control Submenu 3 NTSC PAL 480p/576p, 720p, 1080i Off On Application Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. Connecting the camera to a TV in European countries, China, and so on. Set the signal format to be given priority. If the TV setting does not match, it is changed automatically. Operate with the TV remote control. The factory default settings differ according to the region where the camera is sold. 52 EN For information on using the menus, see "Setup menu" (p. 6). To play back camera images on a TV Connection via AV cable 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Connection via HDMI cable 1 2 3 4 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]). Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera)". Turn on the camera, and use HI to select the image for playback. When the camera is connected to the computer by the USB cable, do not connect the HDMI cable to the camera. HDMI micro connector (type D) Type A Connect to the HDMI connector on the TV. HDMI cable (sold separately: CB-HD1) EN 53 For information on using the menus, see "Setup menu" (p. [. . . ] Make sure that your name, the name of the dealer, the serial number and the year, month and date of purchase are all completed. 2 Since this Warranty Certificate will not be re-issued, keep it in a safe place. 3 Any request for repair by a customer in same country where the product was purchased shall be subject to the terms of the warranty issued by the Olympus distributor in that country. Where the local Olympus distributor does not issue a separate warranty or where the customer is not in the country where the product was purchased the terms of this worldwide warranty shall apply. [. . . ]