User manual OLYMPUS T-10

[. . . ] DIGITAL CAMERA T-10 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] This prints the image with the shooting date. This prints the image with the shooting time. PRINT ORDER 1 ( 1) EXIT MENU 3 Use FG to select [<], and press the H button. 4/30 0 NO DATE TIME NORM 10M FILE 100 0004 '10/10/26 12:30 SET OK SET CANCEL BACK MENU SET OK 6 Use FG to select [SET], and press the H button. 48 EN Reserving one print each of all images on the card [U] Resetting the print reservation data for selected images 1 2 3 1 2 Follow Steps 1 and 2 in [<] (p. Use FG to select [U], and press the H button. Follow Steps 5 and 6 in [<]. 1 2 3 4 5 6 7 Follow Steps 1 and 2 in [<] (p. Use FG to select [<], and press the H button. Use FG to select [KEEP] and press the H button. Use HI to select the image with the print reservation you want to cancel. Use FG to set the print quantity to "0". If necessary, repeat Step 4, and then press the H button when finished. Use FG to select the [X] (date print) screen option, and press the H button. The settings are applied to the remaining images with the print reservation data. Resetting all print reservation data Follow Steps 1 and 2 in [<] (p. Use FG to select either [<] or [U], and press the H button. PRINT ORDER SETTING PRINT ORDERED RESET KEEP BACK MENU SET OK Use FG to select [SET], and press the H button. 3 Use FG to select [RESET], and press the H button. EN 49 Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on. Press the q button to switch to the shooting mode. Wait until #(flash charge) stops blinking before taking pictures. Troubleshooting Battery "The camera does not work even when batteries are installed". Insert new or recharged batteries in the correct direction. "Inserting the battery and the SD/SDHC memory card (sold separately)" (p. 12) If [ALKALINE] is selected with NiMH batteries, the camera may fail to turn on when the batteries are low. Be sure the batteries are fully charged, and select [NiMH] for [BATTERY TYPE]. 41) Battery performance may have been reduced temporarily due to low temperature. [. . . ] Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc. ), improper maintenance, etc. Any defect that occurs due to exhausted batteries, etc. Any defect that occurs due to sand, mud, etc. entering the inside of the product casing. [. . . ]