User manual OLYMPUS TG-620

[. . . ] DIGITAL CAMERA TG-820 TG-620 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] Return to the shooting mode: Tap the top side of the camera twice. Take a picture: Tap the back of the camera twice (Only for the [a Snow] mode). Check the operation of the camera by tapping on the camera after making the settings. Using the LED illuminator as an auxiliary light [LED Illuminator] d (Settings Menu 3) LED Illuminator Submenu 2 Off On Application Disables the LED illuminator. "Using the LED illuminator" (p. 34) When tapping the camera's top EN 53 Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridge-compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer's instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer's instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer's instruction manual. 2 Turn on the printer, and then connect the printer and camera. TG-820 TG-620 Multiconnector Printing images at the printer's standard settings [Easy Print] In the setup menu, set [USB Connection] to [Print]. 46) Baterry/card/ connector cover I (right) USB cable (supplied) 1 Display the image to be printed on the monitor. "Viewing images" (p. 21) 3 4 Press I to start printing. To print another image, use HI to select an image, and press the A button. 54 EN To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. 4 Use FG to select [Size] (Submenu 3), and press I. If the [Printpaper] screen is not displayed, the [Size], [Borderless], and [Pics/Sheet] are set to the printer's standard. Printpaper Size Back MENU Borderless Changing the printer's settings for printing [Custom Print] 1 2 3 Follow Steps 1 and 2 for [Easy Print] (p. 54). Standard Standard Press the A button. Use FG to select the print mode, and press the A button. Submenu 2 Application This prints the image selected in Step 6. This prints all images stored in the internal memory or card. This prints one image in a multiple layout format. This prints an index of all images stored in the internal memory or card. This prints images based on the print reservation data on the card. 5 Use FG to select the [Borderless] or [Pics/ Sheet] settings, and press the A button. Submenu 4 Application The image is printed with a border around it ([Off]). The image is printed to fill the entire paper ([On]). The number of images per sheet ([Pics/Sheet]) is selectable only when [Multi Print] is selected in Step 3. Print All Print Multi Print All Index Print Order*1 *1 Off/On*1 (The number of images per sheet varies depending on the printer. ) *1 [Print Order] is available only when print reservations have been made. "Print Reservations (DPOF)" (p. [. . . ] 2 Since this Warranty Certificate will not be re-issued, keep it in a safe place. 3 Any request for repair by a customer in same country where the product was purchased shall be subject to the terms of the warranty issued by the Olympus distributor in that country. Where the local Olympus distributor does not issue a separate warranty or where the customer is not in the country where the product was purchased the terms of this worldwide warranty shall apply. 4 Where applicable, this Warranty is valid worldwide. [. . . ]